karo: tx6: increase SYS_BOOTM_LEN to 32MiB

[karo-tx-uboot.git] / include / configs / cmi_mpc5xx.h

diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h
index c3c603b42deac22b7ecdf21791ef1d9bd2c26f0b..d081865749cb4fa0901338aa49aa611e4d08eda3 100644 (file)
--- a/include/configs/cmi_mpc5xx.h
+++ b/include/configs/cmi_mpc5xx.h
@@ -2,22 +2,7 @@
  * (C) Copyright 2003
  * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation,
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -38,6 +23,8 @@
 #define CONFIG_MPC555          1               /* This is an MPC555 CPU                */
 #define CONFIG_CMI             1               /* Using the customized cmi board       */
 
+#define        CONFIG_SYS_TEXT_BASE    0x02000000      /* Boot from flash at location 0x00000000 */
+
 /* Serial Console Configuration */
 #define        CONFIG_5xx_CONS_SCI1
 #undef CONFIG_5xx_CONS_SCI2
@@ -57,21 +44,8 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_NET          /* disabeled - causes compile errors */
-
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_LOADB
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_LOADS
 #define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_IMI
 
 
 #if 0
@@ -94,7 +68,6 @@
  */
 
 #define        CONFIG_SYS_LONGHELP                             /* undef to save memory         */
-#define        CONFIG_SYS_PROMPT               "=> "           /* Monitor Command Prompt       */
 #if defined(CONFIG_CMD_KGDB)
 #define        CONFIG_SYS_CBSIZE               1024            /* Console I/O Buffer Size      */
 #else
@@ -109,8 +82,6 @@
 
 #define        CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address         */
 
-#define        CONFIG_SYS_HZ                   1000            /* Decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 1250000 }
 
 
@@ -127,9 +98,8 @@
  * Definitions for initial stack pointer and data area
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       (CONFIG_SYS_IMMR + 0x003f9800)  /* Physical start adress of internal MPC555 writable RAM */
-#define        CONFIG_SYS_INIT_RAM_END (CONFIG_SYS_IMMR + 0x003fffff)  /* Physical end adress of internal MPC555 used RAM area */
-#define        CONFIG_SYS_GBL_DATA_SIZE        64                      /* Size in bytes reserved for initial global data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_RAM_ADDR) - CONFIG_SYS_GBL_DATA_SIZE) /* Offset from the beginning of ram */
+#define        CONFIG_SYS_INIT_RAM_SIZE        (CONFIG_SYS_IMMR + 0x003fffff)  /* Physical end adress of internal MPC555 used RAM area */
+#define CONFIG_SYS_GBL_DATA_OFFSET     ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_RAM_ADDR) - GENERATED_GBL_DATA_SIZE) /* Offset from the beginning of ram */
 #define        CONFIG_SYS_INIT_SP_ADDR 0x013fa000              /* Physical start adress of inital stack */
 
 /*
@@ -142,7 +112,7 @@
 #define ANYBUS_BASE            0x03010000      /* Anybus Module */
 
 #define CONFIG_SYS_RESET_ADRESS        0x01000000      /* Adress which causes reset */
-#define        CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE   /* TEXT_BASE is defined in the board config.mk file.    */
+#define        CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE   /* CONFIG_SYS_TEXT_BASE is defined in the board config.mk file. */
                                                /* This adress is given to the linker with -Ttext to    */
                                                /* locate the text section at this adress.              */
 #define        CONFIG_SYS_MONITOR_LEN          (192 << 10)     /* Reserve 192 kB for Monitor                           */
@@ -267,13 +237,4 @@
  */
 #define CONFIG_SYS_DER                 0x00000000
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01                    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02                    /* Software reboot                      */
-
 #endif /* __CONFIG_H */