Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

[karo-tx-uboot.git] / include / configs / coreboot.h

diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h
index 348a25bd1f245e74ab45d8039ff9489874408ac4..a4aa8f74535e4d3f1d769e8b2c4e51759c2a840a 100644 (file)
--- a/include/configs/coreboot.h
+++ b/include/configs/coreboot.h
@@ -35,9 +35,18 @@
  * (easy to change)
  */
 #define CONFIG_SYS_COREBOOT
-#undef CONFIG_SHOW_BOOT_PROGRESS
+#define CONFIG_SHOW_BOOT_PROGRESS
 #define CONFIG_LAST_STAGE_INIT
+#define CONFIG_SYS_VSNPRINTF
+#define CONFIG_INTEL_CORE_ARCH /* Sandy bridge and ivy bridge chipsets. */
+#define CONFIG_ZBOOT_32
+#define CONFIG_PHYSMEM
 
+#define CONFIG_LMB
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+#define CONFIG_DEFAULT_DEVICE_TREE     link
 
 /*-----------------------------------------------------------------------
  * Watchdog Configuration
@@ -45,16 +54,42 @@
 #undef CONFIG_WATCHDOG
 #undef CONFIG_HW_WATCHDOG
 
+/* SATA AHCI storage */
+
+#define CONFIG_SCSI_AHCI
+
+#ifdef CONFIG_SCSI_AHCI
+#define CONFIG_SYS_64BIT_LBA
+#define CONFIG_SATA_INTEL              1
+#define CONFIG_SCSI_DEV_LIST           {PCI_VENDOR_ID_INTEL, \
+                       PCI_DEVICE_ID_INTEL_NM10_AHCI},       \
+       {PCI_VENDOR_ID_INTEL,           \
+                       PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_MOBILE}, \
+       {PCI_VENDOR_ID_INTEL, \
+                       PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_SERIES6}, \
+       {PCI_VENDOR_ID_INTEL,           \
+                       PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE}
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID    2
+#define CONFIG_SYS_SCSI_MAX_LUN                1
+#define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+                                        CONFIG_SYS_SCSI_MAX_LUN)
+#endif
+
+/* Generic TPM interfaced through LPC bus */
+#define CONFIG_GENERIC_LPC_TPM
+#define CONFIG_TPM_TIS_BASE_ADDRESS        0xfed40000
+
 /*-----------------------------------------------------------------------
  * Real Time Clock Configuration
  */
 #define CONFIG_RTC_MC146818
 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0
+#define CONFIG_SYS_ISA_IO      CONFIG_SYS_ISA_IO_BASE_ADDRESS
 
 /*-----------------------------------------------------------------------
  * Serial Configuration
  */
-#define CONFIG_SERIAL_MULTI
 #define CONFIG_CONS_INDEX              1
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
@@ -67,18 +102,18 @@
 #define CONFIG_SYS_NS16550_COM2        UART1_BASE
 #define CONFIG_SYS_NS16550_PORT_MAPPED
 
-/* max. 1 IDE bus      */
-#define CONFIG_SYS_IDE_MAXBUS          1
-/* max. 1 drive per IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE       (CONFIG_SYS_IDE_MAXBUS * 1)
+#define CONFIG_STD_DEVICES_SETTINGS     "stdin=usbkbd,vga,eserial0\0" \
+                                       "stdout=vga,eserial0,cbmem\0" \
+                                       "stderr=vga,eserial0,cbmem\0"
 
-#define CONFIG_SYS_ATA_BASE_ADDR       CONFIG_SYS_ISA_IO_BASE_ADDRESS
-#define CONFIG_SYS_ATA_IDE0_OFFSET     0x01f0
-#define CONFIG_SYS_ATA_IDE1_OFFSET     0x0170
-#define CONFIG_SYS_ATA_DATA_OFFSET     0
-#define CONFIG_SYS_ATA_REG_OFFSET      0
-#define CONFIG_SYS_ATA_ALT_OFFSET      0x200
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_STDIO_DEREGISTER
+#define CONFIG_CBMEM_CONSOLE
 
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_COMMAND_HISTORY
+#define CONFIG_AUTOCOMPLETE
 
 #define CONFIG_SUPPORT_VFAT
 /************************************************************
@@ -89,16 +124,30 @@
 /************************************************************
  * DISK Partition support
  ************************************************************/
+#define CONFIG_EFI_PARTITION
 #define CONFIG_DOS_PARTITION
 #define CONFIG_MAC_PARTITION
 #define CONFIG_ISO_PARTITION           /* Experimental */
 
+#define CONFIG_CMD_PART
+#define CONFIG_CMD_CBFS
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+#define CONFIG_PARTITION_UUIDS
 
 /*-----------------------------------------------------------------------
  * Video Configuration
  */
-#undef CONFIG_VIDEO
-#undef CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_COREBOOT
+#define CONFIG_VIDEO_SW_CURSOR
+#define VIDEO_FB_16BPP_WORD_SWAP
+#define CONFIG_I8042_KBD
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+
+/* x86 GPIOs are accessed through a PCI device */
+#define CONFIG_INTEL_ICH6_GPIO
 
 /*-----------------------------------------------------------------------
  * Command line configuration.
@@ -112,8 +161,10 @@
 #define CONFIG_CMD_ECHO
 #undef CONFIG_CMD_FLASH
 #define CONFIG_CMD_FPGA
+#define CONFIG_CMD_GPIO
 #define CONFIG_CMD_IMI
 #undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_IO
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_ITEST
 #define CONFIG_CMD_LOADB
@@ -128,13 +179,22 @@
 #define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_SETGETDCR
 #define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_TIME
+#define CONFIG_CMD_GETTIME
 #define CONFIG_CMD_XIMG
-#define CONFIG_CMD_IDE
+#define CONFIG_CMD_SCSI
+
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_EXT2
 
+#define CONFIG_CMD_ZBOOT
+
 #define CONFIG_BOOTDELAY       2
-#define CONFIG_BOOTARGS                "root=/dev/mtdblock0 console=ttyS0,9600"
+#define CONFIG_BOOTARGS                \
+       "root=/dev/sdb3 init=/sbin/init rootwait ro"
+#define CONFIG_BOOTCOMMAND     \
+       "ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000"
+
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE                   115200
@@ -186,12 +246,11 @@
  * (128kB + Environment Sector Size) malloc pool
  */
 #define CONFIG_SYS_STACK_SIZE                  (32 * 1024)
-#define CONFIG_SYS_INIT_SP_ADDR                (256 * 1024 + 16 * 1024)
+#define CONFIG_SYS_CAR_ADDR                    0x19200000
+#define CONFIG_SYS_CAR_SIZE                    (16 * 1024)
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_LEN                 (256 * 1024)
 #define CONFIG_SYS_MALLOC_LEN                  (0x20000 + 128 * 1024)
-/* Address of temporary Global Data */
-#define CONFIG_SYS_INIT_GD_ADDR                (256 * 1024)
 
 
 /* allow to overwrite serial and ethaddr */
@@ -200,10 +259,16 @@
 /*-----------------------------------------------------------------------
  * FLASH configuration
  */
+#define CONFIG_ICH_SPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_MACRONIX
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SPI_FLASH_GIGADEVICE
 #define CONFIG_SYS_NO_FLASH
-#undef CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_MAX_FLASH_SECT              1
-#define CONFIG_SYS_MAX_FLASH_BANKS             1
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SF_TEST
+#define CONFIG_CMD_SPI
+#define CONFIG_SPI
 
 /*-----------------------------------------------------------------------
  * Environment configuration
@@ -217,9 +282,23 @@
 #define CONFIG_PCI
 
 /*-----------------------------------------------------------------------
- * Network device support
+ * USB configuration
  */
-#define CONFIG_NET_MULTI
-
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_PCI
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     12
+#define CONFIG_USB_MAX_CONTROLLER_COUNT        2
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_KEYBOARD
+#define CONFIG_SYS_USB_EVENT_POLL
+
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_SMSC95XX
+
+#define CONFIG_CMD_USB
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       CONFIG_STD_DEVICES_SETTINGS
 
 #endif /* __CONFIG_H */