sunxi: non-FEL SPL boot support for sun7i

[karo-tx-uboot.git] / include / configs / cpci5200.h

diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index b9dabac989d864ded3b892e3622431f529abbc86..ec926fd22d5f9c0294f1fd3bc38db8a591b38656 100644 (file)
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2003-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
 
  */
 
@@ -39,16 +23,16 @@
  * (easy to change)
  */
 
-#define CONFIG_MPC5200         1       /* This is an MPC5xxx CPU */
-#define CONFIG_MPC5xxx         1       /* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200         1       /* This is an MPC5200 CPU */
 #define CONFIG_ICECUBE         1       /* ... on IceCube board   */
 #define CONFIG_CPCI5200                1       /* ... on CPCI5200  board */
 #define CONFIG_MPC5200_DDR     1       /* ... use DDR RAM        */
 
-#define CONFIG_SYS_MPC5XXX_CLKIN       33000000        /* ... running at 33.000000MHz */
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE   0xFFF00000      /* Standard: boot high */
+#endif
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM          0x02    /* Software reboot           */
+#define CONFIG_SYS_MPC5XXX_CLKIN       33000000        /* ... running at 33.000000MHz */
 
 #define CONFIG_HIGH_BATS       1       /* High BATs supported    */
 
@@ -59,7 +43,6 @@
 #define CONFIG_BAUDRATE                9600    /* ... at 115200 bps */
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 230400 }
 
-#ifdef CONFIG_MPC5200          /* MPC5100 PCI is not supported yet. */
 /*
  * PCI Mapping:
  * 0x40000000 - 0x4fffffff - PCI Memory
@@ -84,14 +67,11 @@
 
 #define CONFIG_MII
 #if 0                          /* test-only !!! */
-#define CONFIG_NET_MULTI       1
 #define CONFIG_EEPRO100                1
 #define CONFIG_SYS_RX_ETH_BUFFER       8       /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X         1
 #endif
 
-#endif
-
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -129,11 +109,11 @@
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_DATE
 
-#if (TEXT_BASE == 0xFF000000)  /* Boot low with 16 MB Flash */
+#if (CONFIG_SYS_TEXT_BASE == 0xFF000000)       /* Boot low with 16 MB Flash */
 #   define CONFIG_SYS_LOWBOOT          1
 #   define CONFIG_SYS_LOWBOOT16        1
 #endif
-#if (TEXT_BASE == 0xFF800000)  /* Boot low with  8 MB Flash */
+#if (CONFIG_SYS_TEXT_BASE == 0xFF800000)       /* Boot low with  8 MB Flash */
 #   define CONFIG_SYS_LOWBOOT          1
 #   define CONFIG_SYS_LOWBOOT08        1
 #endif
@@ -169,8 +149,6 @@
 
 #define CONFIG_BOOTCOMMAND     "run flash_vxworks0"
 
-#if defined(CONFIG_MPC5200)
-
 #define CONFIG_RTC_M48T35A     1       /* ST Electronics M48 timekeeper */
 #define CONFIG_SYS_NVRAM_BASE_ADDR     0xfd010000
 #define CONFIG_SYS_NVRAM_SIZE          32*1024
@@ -179,7 +157,6 @@
  * IPB Bus clocking configuration.
  */
 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK         /* define for 133MHz speed */
-#endif
 /*
  * I2C configuration
  */
@@ -240,13 +217,12 @@
 
 /* Use SRAM until RAM will be available */
 #define CONFIG_SYS_INIT_RAM_ADDR       MPC5XXX_SRAM
-#define CONFIG_SYS_INIT_RAM_END        MPC5XXX_SRAM_SIZE       /* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_SIZE       MPC5XXX_SRAM_SIZE       /* Size of used area in DPRAM */
 
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #   define CONFIG_SYS_RAMBOOT          1
 #endif
@@ -259,6 +235,7 @@
  * Ethernet configuration
  */
 #define CONFIG_MPC5xxx_FEC     1
+#define CONFIG_MPC5xxx_FEC_MII100
 /*
  * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
  */
@@ -275,7 +252,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory     */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size  */
 #else
@@ -290,8 +266,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0x100000        /* default load address */
 
-#define CONFIG_SYS_HZ                  1000    /* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_VXWORKS_MAC_PTR     0x00000000      /* Pass Ethernet MAC to VxWorks */
 
 #define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC5xxx CPUs */
@@ -302,13 +276,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT           HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL          HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT           0
-#define CONFIG_SYS_HID0_FINAL          0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START        CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE         CONFIG_SYS_FLASH_SIZE