at91sam9260ek: move board id setup to config header

[karo-tx-uboot.git] / include / configs / da830evm.h

diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h
index 775e360fa2eef450f72160749f30ec3751dbc5d8..198892ba571de796208417e045dc6137271b4670 100644 (file)
--- a/include/configs/da830evm.h
+++ b/include/configs/da830evm.h
@@ -28,6 +28,7 @@
  * Board
  */
 #define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_USE_SPIFLASH
 
 /*
  * SoC Configuration
@@ -48,10 +49,10 @@
  */
 #define CONFIG_SYS_MALLOC_LEN  (0x10000 + 1*1024*1024) /* malloc() len */
 #define PHYS_SDRAM_1                   0xc0000000 /* SDRAM Start */
-#define CONFIG_SYS_MEMTEST_START       PHYS_SDRAM_1 /* memtest start addr */
-#define CONFIG_SYS_MEMTEST_END         (PHYS_SDRAM_1 + 16*1024*1024) /* 16MB test */
+#define CONFIG_SYS_MEMTEST_START       (PHYS_SDRAM_1 + 0x2000000)
+#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + \
+                                               (32 << 20))
 #define CONFIG_NR_DRAM_BANKS   1 /* we have 1 bank of DRAM */
-#define CONFIG_STACKSIZE       (256*1024) /* regular stack */
 
 /*
  * Serial Driver info
@@ -63,7 +64,6 @@
 #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
 #define CONFIG_CONS_INDEX      1               /* use UART0 for console */
 #define CONFIG_BAUDRATE                115200          /* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * I2C Configuration
@@ -85,14 +85,12 @@
  * Network & Ethernet Configuration
  */
 #ifdef CONFIG_DRIVER_TI_EMAC
-#define CONFIG_EMAC_MDIO_PHY_NUM       1
 #define CONFIG_MII
 #define CONFIG_BOOTP_DEFAULT
 #define CONFIG_BOOTP_DNS
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_NET_MULTI
 #endif
 
 /*
@@ -104,16 +102,16 @@
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENV_IS_IN_NAND          /* U-Boot env in NAND Flash  */
 #define CONFIG_ENV_OFFSET              (512 << 10)
-#define CONFIG_ENV_SIZE                        (512 << 10)
+#define CONFIG_ENV_SIZE                        (10 << 10) /* 10KB */
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
+#define CONFIG_SYS_NAND_PAGE_2K
 #define CONFIG_SYS_NAND_CS             3
 #define CONFIG_SYS_NAND_BASE           DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
 #define CONFIG_SYS_NAND_PAGE_2K
-#define CONFIG_SYS_64BIT_VSPRINTF      /* needed for nand_util.c */
-#define CONFIG_SYS_CLE_MASK            0x10
-#define CONFIG_SYS_ALE_MASK            0x8
+#define CONFIG_SYS_NAND_MASK_CLE               0x10
+#define CONFIG_SYS_NAND_MASK_ALE               0x8
 #define CONFIG_SYS_MAX_NAND_DEVICE     1 /* Max number of NAND devices */
-#define NAND_MAX_CHIPS                 1
 #endif
 
 #ifdef CONFIG_USE_NOR
@@ -145,8 +143,8 @@
 #define CONFIG_DAVINCI_SPI
 #define CONFIG_SYS_SPI_BASE            DAVINCI_SPI0_BASE
 #define CONFIG_SYS_SPI_CLK             clk_get(DAVINCI_SPI0_CLKID)
-#define CONFIG_SF_DEFAULT_SPEED                50000000
-#define CONFIG_SYS_ENV_SPI_MAX_HZ      CONFIG_SF_DEFAULT_SPEED
+#define CONFIG_SF_DEFAULT_SPEED                30000000
+#define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 #endif
 
 /*
@@ -158,7 +156,6 @@
 /*
  * U-Boot general configuration
  */
-#undef CONFIG_USE_IRQ                  /* No IRQ/FIQ in U-Boot */
 #undef CONFIG_MISC_INIT_R
 #undef CONFIG_BOOTDELAY
 #define CONFIG_BOOTFILE                "uImage" /* Boot file name */
@@ -167,11 +164,10 @@
 #define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_SYS_MAXARGS     16 /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR   (CONFIG_SYS_MEMTEST_START + 0x700000)
+#define CONFIG_SYS_LOAD_ADDR   (PHYS_SDRAM_1 + 0x700000)
 #define CONFIG_VERSION_VARIABLE
 #define CONFIG_AUTO_COMPLETE   /* Won't work with hush so far, may be later */
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CRC32_VERIFY
@@ -180,7 +176,7 @@
 /*
  * Linux Information
  */
-#define LINUX_BOOT_PARAM_ADDR  (CONFIG_SYS_MEMTEST_START + 0x100)
+#define LINUX_BOOT_PARAM_ADDR  (PHYS_SDRAM_1 + 0x100)
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_BOOTARGS                "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock/2 rw noinitrd ip=dhcp"
@@ -201,7 +197,10 @@
 #define CONFIG_CMD_MEMORY
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_SETGETDCR
-#define CONFIG_CMD_EEPROM
+
+#ifdef CONFIG_CMD_BDI
+#define CONFIG_CLOCKS
+#endif
 
 #ifndef CONFIG_DRIVER_TI_EMAC
 #undef CONFIG_CMD_NET
@@ -223,6 +222,7 @@
 #undef CONFIG_CMD_IMLS
 #undef CONFIG_CMD_FLASH
 #define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
 #define CONFIG_CMD_SAVEENV
 #endif