Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-staging

[karo-tx-uboot.git] / include / configs / davinci_schmoogie.h

diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
index 9cb9838b5ad0bb1cdd17155b60304a61fc8c48a8..8eb7af921c092b6237a555de6879e16cf970c4ff 100644 (file)
--- a/include/configs/davinci_schmoogie.h
+++ b/include/configs/davinci_schmoogie.h
@@ -19,7 +19,6 @@
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
-#include <asm/sizes.h>
 
 /*=======*/
 /* Board */
@@ -27,7 +26,9 @@
 #define SCHMOOGIE
 #define CONFIG_SYS_NAND_LARGEPAGE
 #define CONFIG_SYS_USE_NAND
-#define CONFIG_DISPLAY_CPUINFO
+#define MACH_TYPE_SCHMOOGIE 1255
+#define CONFIG_MACH_TYPE MACH_TYPE_SCHMOOGIE
+
 /*===================*/
 /* SoC Configuration */
 /*===================*/
@@ -40,11 +41,9 @@
 /* Memory Info */
 /*=============*/
 #define CONFIG_SYS_MALLOC_LEN          (0x10000 + 256*1024)    /* malloc() len */
-#define CONFIG_SYS_GBL_DATA_SIZE       128             /* reserved for initial data */
 #define CONFIG_SYS_MEMTEST_START       0x80000000      /* memtest start address */
 #define CONFIG_SYS_MEMTEST_END         0x81000000      /* 16MB RAM test */
 #define CONFIG_NR_DRAM_BANKS   1               /* we have 1 bank of DRAM */
-#define CONFIG_STACKSIZE       (256*1024)      /* regular stack */
 #define PHYS_SDRAM_1           0x80000000      /* DDR Start */
 #define PHYS_SDRAM_1_SIZE      0x08000000      /* DDR size 128MB */
 #define DDR_4BANKS                             /* 4-bank DDR2 (128MB) */
@@ -58,7 +57,6 @@
 #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK     /* Input clock to NS16550 */
 #define CONFIG_CONS_INDEX      1               /* use UART0 for console */
 #define CONFIG_BAUDRATE                115200          /* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 /*===================*/
 /* I2C Configuration */
 /*===================*/
@@ -77,18 +75,17 @@
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
 #define CONFIG_OVERWRITE_ETHADDR_ONCE
-#define CONFIG_NET_MULTI
 /*=====================*/
 /* Flash & Environment */
 /*=====================*/
 #undef CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_NAND_DAVINCI
+#define CONFIG_SYS_NAND_CS             2
 #define CONFIG_ENV_IS_IN_NAND          /* U-Boot env in NAND Flash  */
 #define CONFIG_ENV_SECT_SIZE   2048    /* Env sector Size */
-#define CONFIG_ENV_SIZE                SZ_128K
+#define CONFIG_ENV_SIZE                (128 << 10)     /* 128 KiB */
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is loaded by a bootloader */
-#define CONFIG_SKIP_RELOCATE_UBOOT     /* to a proper address, init done */
 #define CONFIG_SYS_NAND_BASE           0x02000000
 #define CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE     1       /* Max number of NAND devices */
@@ -98,13 +95,11 @@
 /*=====================*/
 #define CONFIG_RTC_DS1307              /* RTC chip on SCHMOOGIE */
 #define CONFIG_SYS_I2C_RTC_ADDR        0x6f    /* RTC chip I2C address */
-#define CONFIG_HAS_UID
 #define CONFIG_UID_DS28CM00            /* Unique ID on SCHMOOGIE */
 #define CONFIG_SYS_UID_ADDR            0x50    /* UID chip I2C address */
 /*==============================*/
 /* U-Boot general configuration */
 /*==============================*/
-#undef CONFIG_USE_IRQ                  /* No IRQ/FIQ in U-Boot */
 #define CONFIG_MISC_INIT_R
 #undef CONFIG_BOOTDELAY
 #define CONFIG_BOOTFILE                "uImage"        /* Boot file name */
@@ -117,7 +112,6 @@
 #define CONFIG_VERSION_VARIABLE
 #define CONFIG_AUTO_COMPLETE           /* Won't work with hush so far, may be later */
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CRC32_VERIFY
@@ -149,11 +143,17 @@
 #undef CONFIG_CMD_SETGETDCR
 #undef CONFIG_CMD_FLASH
 #undef CONFIG_CMD_IMLS
-/*=======================*/
-/* KGDB support (if any) */
-/*=======================*/
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE   115200  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  1       /* which serial port to use */
+
+#ifdef CONFIG_CMD_BDI
+#define CONFIG_CLOCKS
 #endif
+
+#define CONFIG_MAX_RAM_BANK_SIZE       (256 << 20)     /* 256 MB */
+
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_SIZE       0x1000
+#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + \
+                                        CONFIG_SYS_INIT_RAM_SIZE - \
+                                        GENERATED_GBL_DATA_SIZE)
+
 #endif /* __CONFIG_H */