am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so should mmcroot.

[karo-tx-uboot.git] / include / configs / eXalion.h

diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h
index bacdbf0e5d080611bfd7b9e99a2f632af58411cc..c2d04a21c7c9302758d037bc5429bc5ceca081a2 100644 (file)
--- a/include/configs/eXalion.h
+++ b/include/configs/eXalion.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2001
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+ 
  */
 
 /* ------------------------------------------------------------------------- */
@@ -93,9 +77,6 @@
 #define CONFIG_SYS_MAXARGS             8       /* max number of command args   */
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 #define CONFIG_SYS_LOAD_ADDR           0x00100000      /* default load address         */
-
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
 #define CONFIG_MISC_INIT_R     1
 
 /*-----------------------------------------------------------------------
@@ -119,11 +100,10 @@
 #define CONFIG_SYS_INIT_DATA_SIZE      128
 
 #define CONFIG_SYS_INIT_RAM_ADDR       0x40000000
-#define CONFIG_SYS_INIT_RAM_END        0x1000
-#define CONFIG_SYS_INIT_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x1000
+#define CONFIG_SYS_INIT_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_DATA_SIZE)
 
-#define CONFIG_SYS_GBL_DATA_SIZE        256    /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 
@@ -184,9 +164,9 @@
  * PCI stuff
  */
 #define CONFIG_PCI             1       /* include pci support          */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1   /* indirect PCI bridge support */
 #undef CONFIG_PCI_PNP
 
-#define CONFIG_NET_MULTI       1       /* Multi ethernet cards support */
 
 #define CONFIG_EEPRO100                1
 
@@ -228,7 +208,7 @@
  * configuration items that the driver uses to drive the port pins.
  */
 #define CONFIG_HARD_I2C                1       /* To enable I2C support        */
-#undef CONFIG_SOFT_I2C         /* I2C bit-banged               */
+#undef CONFIG_SYS_I2C_SOFT             /* I2C bit-banged               */
 #define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address  */
 #define CONFIG_SYS_I2C_SLAVE           0x7F
 
@@ -414,16 +394,6 @@
 #  define CONFIG_SYS_CACHELINE_SHIFT   5       /* log base 2 of the above value */
 #endif
 
-
-/*-----------------------------------------------------------------------
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
-
-
 /* values according to the manual */
 #define CONFIG_DRAM_50MHZ      1
 #define CONFIG_SDRAM_50MHZ