at91sam9260ek: move board id setup to config header

[karo-tx-uboot.git] / include / configs / edminiv2.h

diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index f0fb48828ae7e8e74627e0b065b3afb1bd3b7fde..adb505e1346b2b334be37bcb2d1a980be9191842 100644 (file)
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -69,13 +69,18 @@
  * - GPIO16 is Power LED control (0 = on, 1 = off)
  * - GPIO17 is Power LED source select (0 = CPLD, 1 = GPIO16)
  * - GPIO18 is Power Button status (0 = Released, 1 = Pressed)
- * - Last GPIO is 26, further bits are supposed to be 0.
+ * - GPIO19 is SATA disk power toggle (toggles on 0-to-1)
+ * - GPIO22 is SATA disk power status ()
+ * - GPIO23 is supply status for SATA disk ()
+ * - GPIO24 is supply control for board (write 1 to power off)
+ * Last GPIO is 25, further bits are supposed to be 0.
  * Enable mask has ones for INPUT, 0 for OUTPUT.
- * Default is LED ON.
+ * Default is LED ON, board ON :)
  */
 
-#define ORION5X_GPIO_OUT_ENABLE        0x03fcffff
-#define ORION5X_GPIO_OUT_VALUE 0x03fcffff
+#define ORION5X_GPIO_OUT_ENABLE                0xfef4f0ca
+#define ORION5X_GPIO_OUT_VALUE         0x00000000
+#define ORION5X_GPIO_IN_POLARITY       0x000000d0
 
 /*
  * NS16550 Configuration
@@ -217,7 +222,7 @@
 /*
  * Size of malloc() pool
  */
-#define CONFIG_SYS_MALLOC_LEN  (1024 * 128) /* 128kB for malloc() */
+#define CONFIG_SYS_MALLOC_LEN  (1024 * 256) /* 256kB for malloc() */
 
 /*
  * Other required minimal configurations