]> git.kernelconcepts.de Git - karo-tx-uboot.git/blobdiff - include/configs/ep8248.h
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
[karo-tx-uboot.git] / include / configs / ep8248.h
index a738425f4f0275cddabc411ad11528187925813e..f1af96ddbba1d14e2259b8c5dbbe5289d4c8445f 100644 (file)
@@ -4,23 +4,7 @@
  *
  * U-Boot configuration for Embedded Planet EP8248 boards.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -31,6 +15,8 @@
 
 #define CONFIG_EP8248                  /* Embedded Planet EP8248 board */
 
+#define        CONFIG_SYS_TEXT_BASE    0xFFF00000
+
 #define CONFIG_BOARD_EARLY_INIT_F 1    /* Call board_early_init_f      */
 
 /* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
@@ -62,7 +48,6 @@
 #define CONFIG_ETHER_ON_FCC            /* Ethernet is on FCC     */
 #undef CONFIG_ETHER_NONE               /* No external Ethernet   */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_SYS_CPMFCR_RAMTYPE      0
 #define CONFIG_SYS_FCC_PSMR            (FCC_PSMR_FDE | FCC_PSMR_LPB)
 
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory     */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size  */
 #else
 
 #define CONFIG_SYS_LOAD_ADDR           0x100000        /* default load address */
 
-#define CONFIG_SYS_HZ                  1000    /* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_SYS_FLASH_BASE          0xFF800000
 #define CONFIG_SYS_I2C_SLAVE           0x7F    /* I2C slave address            */
 #endif
 
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #define CONFIG_SYS_RAMBOOT
 #endif
 #define CONFIG_SYS_IMMR                0xF0000000
 
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END        0x2000  /* End of used area in DPRAM    */
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x2000  /* Size of used area in DPRAM   */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /* Hard reset configuration word */
 #define CONFIG_SYS_HRCW_SLAVE6         0
 #define CONFIG_SYS_HRCW_SLAVE7         0
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                  */
-
 #define CONFIG_SYS_MALLOC_LEN          (4096 << 10)    /* Reserve 4 MB for malloc()    */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */