Merge branch 'karo-tx-uboot' into kc-merge

[karo-tx-uboot.git] / include / configs / exynos5-common.h

diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h
index b03966da38810b58587aba246290910d99b06a34..0ba39a23dd03d4fcf71d3bed7815e8149cc7019d 100644 (file)
--- a/include/configs/exynos5-common.h
+++ b/include/configs/exynos5-common.h
@@ -47,14 +47,6 @@
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_CONSOLE_MUX
 
-#define EXYNOS_DEVICE_SETTINGS \
-               "stdin=serial\0" \
-               "stdout=serial\0" \
-               "stderr=serial\0"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-       EXYNOS_DEVICE_SETTINGS
-
 #define CONFIG_CMD_HASH
 
 /* Thermal Management Unit */
@@ -134,12 +126,11 @@
 #define SPI_FLASH_UBOOT_POS    (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
 
 /* I2C */
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_SYS_I2C
+#define CONFIG_DM_I2C
+#define CONFIG_DM_I2C_COMPAT
 #define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C_S3C24X0_SPEED   100000          /* 100 Kbps */
 #define CONFIG_SYS_I2C_S3C24X0
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C_S3C24X0_SPEED   100000          /* 100 Kbps */
 #define CONFIG_SYS_I2C_S3C24X0_SLAVE    0x0
 #define CONFIG_I2C_EDID
 
@@ -182,6 +173,16 @@
 
 #define CONFIG_CMD_GPIO
 
+/* USB */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     3
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
+
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_SMSC95XX
+
 /* USB boot mode */
 #define CONFIG_USB_BOOTING
 #define EXYNOS_COPY_USB_FNPTR_ADDR     0x02020070
@@ -192,4 +193,41 @@
 #define CONFIG_FIT
 #define CONFIG_FIT_BEST_MATCH
 
+
+#define BOOT_TARGET_DEVICES(func) \
+       func(MMC, mmc, 1) \
+       func(MMC, mmc, 0) \
+       func(PXE, pxe, na) \
+       func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+
+#ifndef MEM_LAYOUT_ENV_SETTINGS
+/* 2GB RAM, bootm size of 256M, load scripts after that */
+#define MEM_LAYOUT_ENV_SETTINGS \
+       "bootm_size=0x10000000\0" \
+       "kernel_addr_r=0x42000000\0" \
+       "fdt_addr_r=0x43000000\0" \
+       "ramdisk_addr_r=0x43300000\0" \
+       "scriptaddr=0x50000000\0" \
+       "pxefile_addr_r=0x51000000\0"
+#endif
+
+#ifndef EXYNOS_DEVICE_SETTINGS
+#define EXYNOS_DEVICE_SETTINGS \
+       "stdin=serial\0" \
+       "stdout=serial\0" \
+       "stderr=serial\0"
+#endif
+
+#ifndef EXYNOS_FDTFILE_SETTING
+#define EXYNOS_FDTFILE_SETTING
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       EXYNOS_DEVICE_SETTINGS \
+       EXYNOS_FDTFILE_SETTING \
+       MEM_LAYOUT_ENV_SETTINGS \
+       BOOTENV
+
 #endif /* __CONFIG_EXYNOS5_COMMON_H */