Merge branch 'u-boot/master'

[karo-tx-uboot.git] / include / configs / flea3.h

diff --git a/include/configs/flea3.h b/include/configs/flea3.h
index dd7c73f3c7bb38c27cb768f5ca6799735a593312..84175676c25505b3d4db84507ca5c785bfc98f25 100644 (file)
--- a/include/configs/flea3.h
+++ b/include/configs/flea3.h
@@ -7,20 +7,7 @@
  *
  * Configuration for the flea3 board.
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -31,7 +18,6 @@
  /* High Level Configuration Options */
 #define CONFIG_ARM1136 /* This is an arm1136 CPU core */
 #define CONFIG_MX35
-#define CONFIG_MX35_HCLK_FREQ  24000000
 
 #define CONFIG_SYS_DCACHE_OFF
 #define CONFIG_SYS_CACHELINE_SIZE      32
@@ -64,11 +50,10 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_MX35_PORT3
-#define CONFIG_SYS_I2C_SPEED           100000
-#define CONFIG_SYS_I2C_SLAVE           0xfe
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_SPD_BUS_NUM         2 /* I2C3 */
+#define CONFIG_SYS_MXC_I2C3_SLAVE      0xfe
 #define CONFIG_MXC_SPI
 #define CONFIG_MXC_GPIO
 
@@ -82,7 +67,6 @@
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX      1
 #define CONFIG_BAUDRATE                115200
-#define CONFIG_SYS_BAUDRATE_TABLE      {9600, 19200, 38400, 57600, 115200}
 
 /*
  * Command definition
@@ -120,7 +104,6 @@
 #define CONFIG_FEC_MXC_PHYADDR 0x1
 
 #define CONFIG_MII
-#define CONFIG_DISCOVER_PHY
 
 #define CONFIG_ARP_TIMEOUT     200UL
 
@@ -131,7 +114,6 @@
 #define CONFIG_SYS_PROMPT      "flea3 U-Boot > "
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
-#define        CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE      256     /* Console I/O Buffer Size */
@@ -147,16 +129,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
-#define CONFIG_SYS_HZ                          1000
-
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 * 1024)    /* regular stack */
-
 /*
  * Physical Memory Map
  */
@@ -224,7 +196,6 @@
  * NAND FLASH driver setup
  */
 #define CONFIG_NAND_MXC
-#define CONFIG_NAND_MXC_V1_1
 #define CONFIG_MXC_NAND_REGS_BASE      (NFC_BASE_ADDR)
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           (NFC_BASE_ADDR)
@@ -235,8 +206,6 @@
  * Default environment and default scripts
  * to update uboot and load kernel
  */
-#define xstr(s)        str(s)
-#define str(s) #s
 
 #define CONFIG_HOSTNAME flea3
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
@@ -249,16 +218,16 @@
                ":${hostname}:${netdev}:off panic=1\0"                  \
        "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"               \
        "addip=if test -n ${ipdyn};then run addip_dyn;"                 \
-               "else run addip_sta;fi\0"       \
+               "else run addip_sta;fi\0"                               \
        "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
        "addtty=setenv bootargs ${bootargs}"                            \
                " console=ttymxc2,${baudrate}\0"                        \
        "addmisc=setenv bootargs ${bootargs} ${misc}\0"                 \
        "loadaddr=80800000\0"                                           \
        "kernel_addr_r=80800000\0"                                      \
-       "hostname=" xstr(CONFIG_HOSTNAME) "\0"                          \
-       "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0"                   \
-       "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0"             \
+       "hostname=" __stringify(CONFIG_HOSTNAME) "\0"                   \
+       "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"            \
+       "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"      \
        "flash_self=run ramargs addip addtty addmtd addmisc;"           \
                "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
        "flash_nfs=run nfsargs addip addtty addmtd addmisc;"            \
@@ -272,9 +241,9 @@
                "run ramargs addip addtty addmtd addmisc;"              \
                "bootm ${kernel_addr_r} ${ramdisk_addr_r};"             \
                "else echo Images not loades;fi\0"                      \
-       "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0"                 \
+       "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"          \
        "load=tftp ${loadaddr} ${u-boot}\0"                             \
-       "uboot_addr=" xstr(CONFIG_SYS_MONITOR_BASE) "\0"                \
+       "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"         \
        "update=protect off ${uboot_addr} +40000;"                      \
                "erase ${uboot_addr} +40000;"                           \
                "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"          \