at91: enable USB ethernet for taskit stamp9g20

[karo-tx-uboot.git] / include / configs / gr_cpci_ax2000.h

diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h
index bb4ea7921d08b17871c729af9494391386bb9885..2437b4b6133add2629b82c3ed71669c9791dad63 100644 (file)
--- a/include/configs/gr_cpci_ax2000.h
+++ b/include/configs/gr_cpci_ax2000.h
@@ -8,23 +8,7 @@
  * (C) Copyright 2008
  * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H__
@@ -108,7 +92,7 @@
                "bootm ${kernel_addr}\0"                                \
        "flash_self=run ramargs addip;"                                 \
                "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
-       "getkernel=tftpboot \$\(scratch\)\ \$\(bootfile\)\0" \
+       "getkernel=tftpboot $(scratch) $(bootfile)\0" \
        "bootargs=console=ttyS0,38400 root=/dev/nfs rw nfsroot=192.168.0.20:/export/rootfs ip=192.168.0.206:192.168.0.20:192.168.0.1:255.255.255.0:ax2000:eth0\0"
 
 #if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SRAM
@@ -135,9 +119,9 @@
 #define CONFIG_GATEWAYIP 192.168.0.1
 #define CONFIG_SERVERIP 192.168.0.20
 #define CONFIG_IPADDR 192.168.0.206
-#define CONFIG_ROOTPATH /export/rootfs
+#define CONFIG_ROOTPATH "/export/rootfs"
 #define CONFIG_HOSTNAME  ax2000
-#define CONFIG_BOOTFILE  /uImage
+#define CONFIG_BOOTFILE "/uImage"
 
 #define CONFIG_BOOTCOMMAND     "run flash_self"
 
@@ -261,10 +245,9 @@
 #define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
 #endif
 
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_RAM_END - GENERATED_GBL_DATA_SIZE)
 
-#define CONFIG_SYS_PROM_SIZE           (8192-CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_PROM_SIZE           (8192-GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_PROM_OFFSET         (CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)
 
 #define CONFIG_SYS_INIT_SP_OFFSET      (CONFIG_SYS_PROM_OFFSET-32)
@@ -292,7 +275,6 @@
 /*
  * Ethernet configuration uses on board SMC91C111
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111          1
 #define CONFIG_SMC91111_BASE           0x20000300      /* chip select 3         */
 #define CONFIG_SMC_USE_32_BIT          1       /* 32 bit bus  */
@@ -307,7 +289,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory     */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size  */
 #else
@@ -322,8 +303,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0x100000        /* default load address */
 
-#define CONFIG_SYS_HZ                  1000    /* decrementer freq: 1 ms ticks */
-
 /*
  * Various low-level settings
  */