Merge branch 'master' of git://git.denx.de/u-boot-arm

[karo-tx-uboot.git] / include / configs / igep00x0.h

diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h
index af793e199b9342e56b5a921469009e750f4324a1..0e7f9247c8fd6da4d20fd99cf43f00891ea2f44c 100644 (file)
--- a/include/configs/igep00x0.h
+++ b/include/configs/igep00x0.h
@@ -67,6 +67,9 @@
 #define CONFIG_SYS_NS16550_REG_SIZE    (-4)
 #define CONFIG_SYS_NS16550_CLK         V_NS16550_CLK
 
+/* define to avoid U-Boot to hang while waiting for TEMT */
+#define CONFIG_SYS_NS16550_BROKEN_TEMT
+
 /* select serial console configuration */
 #define CONFIG_CONS_INDEX              3
 #define CONFIG_SYS_NS16550_COM3                OMAP34XX_UART3
@@ -82,6 +85,9 @@
 #define CONFIG_OMAP_HSMMC              1
 #define CONFIG_DOS_PARTITION           1
 
+/* define to enable boot progress via leds */
+#define CONFIG_SHOW_BOOT_PROGRESS
+
 /* USB */
 #define CONFIG_MUSB_UDC                        1
 #define CONFIG_USB_OMAP3               1
@@ -112,7 +118,9 @@
 #ifdef CONFIG_BOOT_NAND
 #define CONFIG_CMD_NAND
 #endif
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
 #define CONFIG_CMD_NET         /* bootp, tftpboot, rarpboot    */
+#endif
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_NFS         /* NFS support                  */
@@ -126,8 +134,6 @@
 #define CONFIG_HARD_I2C                        1
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_SYS_I2C_SLAVE           1
-#define CONFIG_SYS_I2C_BUS             0
-#define CONFIG_SYS_I2C_BUS_SELECT      1
 #define CONFIG_DRIVER_OMAP34XX_I2C     1
 
 /*
@@ -180,7 +186,7 @@
                "bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
-       "if mmc rescan ${mmcdev}; then " \
+       "mmc dev ${mmcdev}; if mmc rescan; then " \
                "echo SD/MMC found on device ${mmcdev};" \
                "if run loadbootenv; then " \
                        "run importbootenv;" \
@@ -230,20 +236,12 @@
 #define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
 #define CONFIG_SYS_HZ                  1000
 
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 << 10)     /* regular stack 128 KiB */
-
 /*
  * Physical Memory Map
  *
  */
 #define CONFIG_NR_DRAM_BANKS   2       /* CS1 may or may not be populated */
 #define PHYS_SDRAM_1           OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE      (32 << 20)      /* at least 32 meg */
 #define PHYS_SDRAM_2           OMAP34XX_SDRC_CS1
 
 /*
@@ -302,6 +300,7 @@
 
 /* SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_TEXT_BASE           0x40200800
 #define CONFIG_SPL_MAX_SIZE            (54 * 1024)
@@ -319,6 +318,7 @@
 #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION   1
 #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME       "u-boot.img"
 
+#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBDISK_SUPPORT
 #define CONFIG_SPL_I2C_SUPPORT
@@ -344,6 +344,9 @@
 
 #ifdef CONFIG_BOOT_NAND
 #define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
 
 /* NAND boot config */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE