at91: enable USB ethernet for taskit stamp9g20

[karo-tx-uboot.git] / include / configs / imx31_litekit.h

diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index 61310089b7b0bf2af2eb4e5117435939f329d7a1..8428d84496ca4f3e40ddb41be0e0c67e58fad2e7 100644 (file)
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -6,39 +6,26 @@
  *
  * Configuration settings for the LogicPD i.MX31 Litekit board.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/arch/mx31-regs.h>
+#include <asm/arch/imx-regs.h>
 
  /* High Level Configuration Options */
 #define CONFIG_ARM1136         1    /* This is an arm1136 CPU core */
 #define CONFIG_MX31            1    /* in a mx31 */
-#define CONFIG_MX31_HCLK_FREQ  26000000
 #define CONFIG_MX31_CLK32      32000
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
+#define CONFIG_SYS_TEXT_BASE   0xa0000000
+
+#define CONFIG_MACH_TYPE       MACH_TYPE_MX31LITE
+
 /* Temporarily disabled */
 #if 0
 #define CONFIG_OF_LIBFDT               1
@@ -54,30 +41,35 @@
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 128 * 1024)
-#define CONFIG_SYS_GBL_DATA_SIZE       128  /* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
  */
 
-#define CONFIG_MXC_UART        1
-#define CONFIG_SYS_MX31_UART1          1
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE   UART1_BASE
+#define CONFIG_MXC_GPIO
 
 #define CONFIG_HARD_SPI                1
 #define CONFIG_MXC_SPI         1
 #define CONFIG_DEFAULT_SPI_BUS 1
-#define CONFIG_DEFAULT_SPI_MODE        (SPI_MODE_2 | SPI_CS_HIGH)
-
-#define CONFIG_RTC_MC13783     1
-/* MC13783 connected to CSPI2 and SS0 */
-#define CONFIG_MC13783_SPI_BUS 1
-#define CONFIG_MC13783_SPI_CS  0
+#define CONFIG_DEFAULT_SPI_MODE        (SPI_MODE_0 | SPI_CS_HIGH)
+
+/* PMIC Controller */
+#define CONFIG_POWER
+#define CONFIG_POWER_SPI
+#define CONFIG_POWER_FSL
+#define CONFIG_FSL_PMIC_BUS    1
+#define CONFIG_FSL_PMIC_CS     0
+#define CONFIG_FSL_PMIC_CLK    1000000
+#define CONFIG_FSL_PMIC_MODE   (SPI_MODE_0 | SPI_CS_HIGH)
+#define CONFIG_FSL_PMIC_BITLEN 32
+#define CONFIG_RTC_MC13XXX
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX      1
 #define CONFIG_BAUDRATE                115200
-#define CONFIG_SYS_BAUDRATE_TABLE      {9600, 19200, 38400, 57600, 115200}
 
 /***********************************************************
  * Command definition
@@ -89,6 +81,7 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SPI
 #define CONFIG_CMD_DATE
+#define CONFIG_CMD_NAND
 
 #define CONFIG_BOOTDELAY       3
 
@@ -104,7 +97,6 @@
        "prg_uboot=tftpboot 0x80000000 u-boot-imx31_litekit.bin; protect off all; erase 0xa00d0000 0xa01effff; cp.b 0x80000000 0xa00d0000 $(filesize)\0"
 
 
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X         1
 #define CONFIG_SMC911X_BASE    (CS4_BASE + 0x00020000)
 #define CONFIG_SMC911X_32_BIT  1
@@ -125,23 +117,21 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0 /* default load address */
 
-#define CONFIG_SYS_HZ                  1000
-
 #define CONFIG_CMDLINE_EDITING 1
 
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 * 1024) /* regular stack */
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS   1
 #define PHYS_SDRAM_1           CSD0_BASE
 #define PHYS_SDRAM_1_SIZE      (128 * 1024 * 1024)
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE               IRAM_SIZE
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
@@ -174,4 +164,13 @@
 #undef CONFIG_CMD_MTDPARTS
 #define CONFIG_JFFS2_DEV       "nor0"
 
+/*
+ * NAND flash
+ */
+#define CONFIG_NAND_MXC
+#define CONFIG_MXC_NAND_REGS_BASE      NFC_BASE_ADDR
+#define CONFIG_SYS_MAX_NAND_DEVICE     1
+#define CONFIG_SYS_NAND_BASE           NFC_BASE_ADDR
+#define CONFIG_MXC_NAND_HWECC
+
 #endif /* __CONFIG_H */