* Philippe Robin, <philippe.robin@arm.com>
* Configuration for Compact Integrator board.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SYS_MEMTEST_START 0x100000
-#define CONFIG_SYS_MEMTEST_END 0x10000000
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */
-#define CONFIG_SYS_TIMERBASE 0x13000100
+#include "integrator-common.h"
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
+/* Integrator CP-specific configuration */
+#define CONFIG_ARCH_CINTEGRATOR
+#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */
/*
* Hardware drivers
*/
-#define CONFIG_NET_MULTI
#define CONFIG_SMC91111
#define CONFIG_SMC_USE_32_BIT
#define CONFIG_SMC91111_BASE 0xC8000000
#undef CONFIG_SMC91111_EXT_PHY
-/*
- * NS16550 Configuration
- */
+/* PL011 configuration */
#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_CLOCK 14745600
#define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, (void *)CONFIG_SYS_SERIAL1 }
#define CONFIG_CONS_INDEX 0
#define CONFIG_BAUDRATE 38400
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SYS_SERIAL0 0x16000000
#define CONFIG_SYS_SERIAL1 0x17000000
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
/*
* Command line configuration.
*/
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-
-
-#if 0
-#define CONFIG_BOOTDELAY 2
-#define CONFIG_BOOTARGS "root=/dev/nfs nfsroot=<IP address>:/<exported rootfs> mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
-#define CONFIG_BOOTCOMMAND "bootp ; bootm"
-#endif
-/* The kernel command line & boot command below are for a platform flashed with afu.axf
-
-Image 666 Block 0 End Block 0 address 0x24000000 exec 0x24000000- name u-boot
-Image 667 Block 1 End Block 13 address 0x24040000 exec 0x24040000- name u-linux
-Image 668 Block 14 End Block 33 address 0x24380000 exec 0x24380000- name rootfs
-SIB at Block62 End Block62 address 0x24f80000
+#include <config_cmd_default.h>
-*/
#define CONFIG_BOOTDELAY 2
-#define CONFIG_BOOTARGS "root=/dev/mtdblock2 mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0 console=ttyAMA0"
-#define CONFIG_BOOTCOMMAND "cp 0x24080000 0x7fc0 0x100000; bootm"
+#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
+#define CONFIG_BOOTCOMMAND "tftpboot ; bootm"
+#define CONFIG_SERVERIP 192.168.1.100
+#define CONFIG_IPADDR 192.168.1.104
+#define CONFIG_BOOTFILE "uImage"
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_PROMPT "Integrator-CP # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size*/
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size*/
-
-#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
-
-/*-----------------------------------------------------------------------
+/*
* FLASH and environment organization
-
* Top varies according to amount fitted
* Reserve top 4 blocks of flash
* - ARM Boot Monitor
* - U-Boot environment
*
* Base is always 0x24000000
-
*/
#define CONFIG_SYS_FLASH_BASE 0x24000000
#define CONFIG_SYS_FLASH_CFI 1
#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */
#define CONFIG_ENV_SIZE 8192 /* 8KB */
-/*-----------------------------------------------------------------------
- * CP control registers
- */
-#define CPCR_BASE 0xCB000000 /* CP Registers*/
-#define OS_FLASHPROG 0x00000004 /* Flash register*/
-#define CPMASK_EXTRABANK 0x8
-#define CPMASK_FLASHSIZE 0x4
-#define CPMASK_FLWREN 0x2
-#define CPMASK_FLVPPEN 0x1
-
-/*
- * The ARM boot monitor initializes the board.
- * However, the default U-Boot code also performs the initialization.
- * If desired, this can be prevented by defining SKIP_LOWLEVEL_INIT
- * - see documentation supplied with board for details of how to choose the
- * image to run at reset/power up
- * e.g. whether the ARM Boot Monitor runs before U-Boot
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
- */
-
-/*
- * The ARM boot monitor does not relocate U-Boot.
- * However, the default U-Boot code performs the relocation check,
- * and may relocate the code if the memory map is changed.
- * If necessary this can be prevented by defining SKIP_RELOCATE_UBOOT
-
-#define SKIP_CONFIG_RELOCATE_UBOOT
-
- */
-/*-----------------------------------------------------------------------
- * There are various dependencies on the core module (CM) fitted
- * Users should refer to their CM user guide
- * - when porting adjust u-boot/Makefile accordingly
- * to define the necessary CONFIG_ s for the CM involved
- * see e.g. cp_926ejs_config
- */
-
-#include "armcoremodule.h"
-
-/*
- * If CONFIG_SKIP_LOWLEVEL_INIT is not defined &
- * the core module has a CM_INIT register
- * then the U-Boot initialisation code will
- * e.g. ARM Boot Monitor or pre-loader is repeated once
- * (to re-initialise any existing CM_INIT settings to safe values).
- *
- * This is usually not the desired behaviour since the platform
- * will either reboot into the ARM monitor (or pre-loader)
- * or continuously cycle thru it without U-Boot running,
- * depending upon the setting of Integrator/CP switch S2-4.
- *
- * However it may be needed if Integrator/CP switch S2-1
- * is set OFF to boot direct into U-Boot.
- * In that case comment out the line below.
-#undef CONFIG_CM_INIT
- */
#endif /* __CONFIG_H */
projects / karo-tx-uboot.git / blobdiff