Move default y configs out of arch/board Kconfig

[karo-tx-uboot.git] / include / configs / km / kmp204x-common.h

diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h
index efd96352eca45f93f3ba951a319b8a6c9e4106b3..ed942a0e061f6c1fea7d5072574012214c600762 100644 (file)
--- a/include/configs/km/kmp204x-common.h
+++ b/include/configs/km/kmp204x-common.h
@@ -11,7 +11,7 @@
 #define CONFIG_PHYS_64BIT
 #define CONFIG_PPC_P2041
 
-#define CONFIG_SYS_TEXT_BASE   0xfff80000
+#define CONFIG_SYS_TEXT_BASE   0xfff40000
 
 #define CONFIG_KM_DEF_NETDEV   "netdev=eth0\0"
 
@@ -21,6 +21,9 @@
 
 #define CONFIG_NAND_ECC_BCH
 
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+
 /* common KM defines */
 #include "keymile-common.h"
 
@@ -164,7 +167,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 
@@ -235,7 +237,7 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN         (512 * 1024)
+#define CONFIG_SYS_MONITOR_LEN         (768 * 1024)
 #define CONFIG_SYS_MALLOC_LEN          (1024 * 1024)
 
 /* Serial Port - controlled on board with jumper J8
@@ -297,7 +299,6 @@ int get_scl(void);
  * eSPI - Enhanced SPI
  */
 #define CONFIG_FSL_ESPI
-#define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_BAR   /* 4 byte-addressing */
 #define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_SPI_FLASH_SPANSION
@@ -336,10 +337,26 @@ int get_scl(void);
 #define CONFIG_SYS_BMAN_MEM_BASE       0xf4000000
 #define CONFIG_SYS_BMAN_MEM_PHYS       0xff4000000ull
 #define CONFIG_SYS_BMAN_MEM_SIZE       0x00200000
+#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
+#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
+#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
+#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
+                                       CONFIG_SYS_BMAN_CENA_SIZE)
+#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_BMAN_SWP_ISDR_REG   0xE08
 #define CONFIG_SYS_QMAN_NUM_PORTALS    10
 #define CONFIG_SYS_QMAN_MEM_BASE       0xf4200000
 #define CONFIG_SYS_QMAN_MEM_PHYS       0xff4200000ull
 #define CONFIG_SYS_QMAN_MEM_SIZE       0x00200000
+#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
+#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
+#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
+#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
+                                       CONFIG_SYS_QMAN_CENA_SIZE)
+#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_QMAN_SWP_ISDR_REG   0xE08
 
 #define CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_DPAA_PME
@@ -376,11 +393,18 @@ int get_scl(void);
 #define CONFIG_LOADS_ECHO              /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   /* allow baudrate change */
 
+/*
+ * Hardware Watchdog
+ */
+#define CONFIG_WATCHDOG                        /* enable CPU watchdog */
+#define CONFIG_WATCHDOG_PRESC 34       /* wdog prescaler 2^(64-34) (~10min) */
+#define CONFIG_WATCHDOG_RC WRC_CHIP    /* reset chip on watchdog event */
+
+
 /*
  * additionnal command line configuration.
  */
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_ERRATA
 
 /* we don't need flash support */