OMAP3: Zoom2: Fix ARM relocation support

[karo-tx-uboot.git] / include / configs / kmeter1.h

diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
index d27b75b6471177755723ef5b898e532b7f4c995d..8fcadfee50603c68217d580578416591beed6814 100644 (file)
--- a/include/configs/kmeter1.h
+++ b/include/configs/kmeter1.h
@@ -30,6 +30,8 @@
 #define CONFIG_KMETER1         1 /* KMETER1 board specific */
 #define CONFIG_HOSTNAME                kmeter1
 
+#define        CONFIG_SYS_TEXT_BASE    0xF0000000
+
 /* include common defines/options for all Keymile boards */
 #include "keymile-common.h"
 
@@ -157,7 +159,7 @@
 /*
  * The reserved memory
  */
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE /* start of monitor */
 #define CONFIG_SYS_FLASH_BASE          0xF0000000
 #define CONFIG_SYS_PIGGY_BASE          0xE8000000
 #define        CONFIG_SYS_PIGGY_SIZE           128
@@ -177,9 +179,8 @@
  */
 #define CONFIG_SYS_INIT_RAM_LOCK       1
 #define CONFIG_SYS_INIT_RAM_ADDR       0xE6000000 /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_END        0x1000 /* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_SIZE       0x100 /* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x1000 /* Size of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
 /*
  * Local Bus Configuration & Clock Setup
@@ -257,7 +258,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -284,7 +284,7 @@
  * QE UEC ethernet configuration
  */
 #define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME                "FSL UEC0"
+#define CONFIG_ETHPRIME                "UEC0"
 
 #define CONFIG_UEC_ETH1                /* GETH1 */
 #define UEC_VERBOSE_DEBUG      1
@@ -358,16 +358,17 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ           (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ           (256 << 20) /* Initial Memory map for Linux */
 
 /*
  * Core HID Setup
  */
 #define CONFIG_SYS_HID0_INIT           0x000000000
-#define CONFIG_SYS_HID0_FINAL          HID0_ENABLE_MACHINE_CHECK
+#define CONFIG_SYS_HID0_FINAL          (HID0_ENABLE_MACHINE_CHECK | \
+                                        HID0_ENABLE_INSTRUCTION_CACHE)
 #define CONFIG_SYS_HID2                        HID2_HBE
 
 /*
@@ -440,14 +441,6 @@
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 #endif /* CONFIG_PCI */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02 /* Software reboot */
-
 #define BOOTFLASH_START        F0000000
 
 #define CONFIG_PRAM    512     /* protected RAM [KBytes] */