Merge remote-tracking branch 'u-boot-ti/master'

[karo-tx-uboot.git] / include / configs / lubbock.h

diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index 3a99ec25c4be25221ce022a6091f07a0e37acc50..5886a155dcbe3e66590e169ee0513b84feb3c5ce 100644 (file)
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -34,31 +34,28 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_PXA250          1       /* This is an PXA250 CPU    */
+#define CONFIG_CPU_PXA25X              1       /* This is an PXA250 CPU    */
 #define CONFIG_LUBBOCK         1       /* on an LUBBOCK Board      */
 #define CONFIG_LCD             1
 #ifdef CONFIG_LCD
 #define CONFIG_SHARP_LM8V31
 #endif
 #define CONFIG_MMC
-#define BOARD_LATE_INIT                1
+#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_DOS_PARTITION
-
-#undef CONFIG_USE_IRQ                  /* we don't need IRQ/FIQ stuff */
+#define        CONFIG_SYS_TEXT_BASE    0x0
 
 /* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_NO_DCACHE
+#define CONFIG_SYS_DCACHE_OFF
 
 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN      (CONFIG_ENV_SIZE + 128*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE 0x0C000000
 
@@ -67,6 +64,7 @@
  */
 #define CONFIG_PXA_SERIAL
 #define CONFIG_FFUART         1       /* we use FFUART on LUBBOCK */
+#define CONFIG_CONS_INDEX      3
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -110,7 +108,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_HUSH_PARSER         1
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 
 #define CONFIG_SYS_LONGHELP                            /* undef to save memory         */
 #ifdef CONFIG_SYS_HUSH_PARSER
@@ -132,26 +129,13 @@
 #define CONFIG_SYS_HZ                  1000
 #define CONFIG_SYS_CPUSPEED            0x161           /* set core clock to 400/200/100 MHz */
 
-                                               /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
 #ifdef CONFIG_MMC
-#define CONFIG_PXA_MMC
+#define        CONFIG_GENERIC_MMC
+#define        CONFIG_PXA_MMC_GENERIC
 #define CONFIG_CMD_MMC
 #define CONFIG_SYS_MMC_BASE            0xF0000000
 #endif
 
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128*1024)      /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ   (4*1024)        /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ   (4*1024)        /* FIQ stack */
-#endif
-
 /*
  * Physical Memory Map
  */
@@ -177,7 +161,7 @@
 #define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
-#define        CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1)
+#define        CONFIG_SYS_INIT_SP_ADDR         0xfffff800
 
 #define FPGA_REGS_BASE_PHYSICAL 0x08000000
 
@@ -202,6 +186,9 @@
 
 #define CONFIG_SYS_PSSR_VAL            0x20
 
+#define        CONFIG_SYS_CCCR                 CCCR_L27|CCCR_M2|CCCR_N10
+#define        CONFIG_SYS_CKEN                 0x0
+
 /*
  * Memory settings
  */
@@ -212,6 +199,9 @@
 #define CONFIG_SYS_MDREFR_VAL          0x00018018
 #define CONFIG_SYS_MDMRS_VAL           0x00000000
 
+#define        CONFIG_SYS_FLYCNFG_VAL          0x00000000
+#define        CONFIG_SYS_SXCNFG_VAL           0x00000000
+
 /*
  * PCMCIA and CF Interfaces
  */