#define CONFIG_405EX 1 /* Specifc 405EX support*/
#define CONFIG_SYS_CLK_FREQ 33330000 /* ext frequency to pll */
+#define CONFIG_SYS_TEXT_BASE 0xFFFA0000
+
/*
* Include common defines/options for all AMCC eval boards
*/
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
-#define CFG_FLASH_BASE 0xFC000000
-#define CFG_FPGA_BASE 0xF0000000
-#define CFG_PERIPHERAL_BASE 0xEF600000 /* internal peripherals*/
+#define CONFIG_SYS_FLASH_BASE 0xFC000000
+#define CONFIG_SYS_FPGA_BASE 0xF0000000
/*-----------------------------------------------------------------------
* Initial RAM & Stack Pointer Configuration Options
* the latter of which is less than desireable since it requires
* setting up the SDRAM and ECC in assembly code.
*
- * To use (2), define 'CFG_INIT_DCACHE_CS' to be an unused chip
+ * To use (2), define 'CONFIG_SYS_INIT_DCACHE_CS' to be an unused chip
* select on the External Bus Controller (EBC) and then select a
- * value for 'CFG_INIT_RAM_ADDR' outside of the range of valid,
- * physical SDRAM. Otherwise, undefine 'CFG_INIT_DCACHE_CS' and
- * select a value for 'CFG_INIT_RAM_ADDR' within the range of valid,
+ * value for 'CONFIG_SYS_INIT_RAM_ADDR' outside of the range of valid,
+ * physical SDRAM. Otherwise, undefine 'CONFIG_SYS_INIT_DCACHE_CS' and
+ * select a value for 'CONFIG_SYS_INIT_RAM_ADDR' within the range of valid,
* physical SDRAM to use (3).
*-----------------------------------------------------------------------*/
-#define CFG_INIT_DCACHE_CS 4
+#define CONFIG_SYS_INIT_DCACHE_CS 4
-#if defined(CFG_INIT_DCACHE_CS)
-#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + ( 1 << 30)) /* 1 GiB */
+#if defined(CONFIG_SYS_INIT_DCACHE_CS)
+#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + ( 1 << 30)) /* 1 GiB */
#else
-#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + (32 << 20)) /* 32 MiB */
-#endif /* defined(CFG_INIT_DCACHE_CS) */
+#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + (32 << 20)) /* 32 MiB */
+#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
-#define CFG_INIT_RAM_END (4 << 10) /* 4 KiB */
-#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) /* 4 KiB */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
/*
* If the data cache is being used for the primordial stack and global
* for the POST word.
*/
-#if defined(CFG_INIT_DCACHE_CS)
-# define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-# define CFG_POST_ALT_WORD_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP6)
+#if defined(CONFIG_SYS_INIT_DCACHE_CS)
+# define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+# define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
#else
-# define CFG_INIT_EXTRA_SIZE 16
-# define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - CFG_INIT_EXTRA_SIZE)
-# define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4)
-# define CFG_OCM_DATA_ADDR CFG_INIT_RAM_ADDR
-#endif /* defined(CFG_INIT_DCACHE_CS) */
+# define CONFIG_SYS_INIT_EXTRA_SIZE 16
+# define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_EXTRA_SIZE)
+# define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_INIT_RAM_ADDR
+#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
/*-----------------------------------------------------------------------
* Serial Port
*----------------------------------------------------------------------*/
-#undef CFG_EXT_SERIAL_CLOCK /* no ext. clk */
-/* define this if you want console on UART1 */
-#undef CONFIG_UART1_CONSOLE
+#define CONFIG_CONS_INDEX 1 /* Use UART0 */
+#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no ext. clk */
/*-----------------------------------------------------------------------
* Environment
*----------------------------------------------------------------------*/
-#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
/*-----------------------------------------------------------------------
* FLASH related
*----------------------------------------------------------------------*/
-#define CFG_FLASH_CFI /* The flash is CFI compatible */
-#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
+#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
-#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE}
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
-#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
/* Address and size of Redundant Environment Sector */
-#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
-#endif /* CFG_ENV_IS_IN_FLASH */
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
+#endif /* CONFIG_ENV_IS_IN_FLASH */
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
-#define CFG_MBYTES_SDRAM (256) /* 256MB */
+#define CONFIG_SYS_MBYTES_SDRAM (256) /* 256MB */
-#define CFG_SDRAM0_MB0CF_BASE (( 0 << 20) + CFG_SDRAM_BASE)
-#define CFG_SDRAM0_MB1CF_BASE ((128 << 20) + CFG_SDRAM_BASE)
+#define CONFIG_SYS_SDRAM0_MB0CF_BASE (( 0 << 20) + CONFIG_SYS_SDRAM_BASE)
+#define CONFIG_SYS_SDRAM0_MB1CF_BASE ((128 << 20) + CONFIG_SYS_SDRAM_BASE)
/* DDR1/2 SDRAM Device Control Register Data Values */
-#define CFG_SDRAM0_MB0CF ((CFG_SDRAM0_MB0CF_BASE >> 3) | \
+#define CONFIG_SYS_SDRAM0_MB0CF ((CONFIG_SYS_SDRAM0_MB0CF_BASE >> 3) | \
SDRAM_RXBAS_SDSZ_128MB | \
SDRAM_RXBAS_SDAM_MODE2 | \
SDRAM_RXBAS_SDBE_ENABLE)
-#define CFG_SDRAM0_MB1CF ((CFG_SDRAM0_MB1CF_BASE >> 3) | \
+#define CONFIG_SYS_SDRAM0_MB1CF ((CONFIG_SYS_SDRAM0_MB1CF_BASE >> 3) | \
SDRAM_RXBAS_SDSZ_128MB | \
SDRAM_RXBAS_SDAM_MODE2 | \
SDRAM_RXBAS_SDBE_ENABLE)
-#define CFG_SDRAM0_MB2CF SDRAM_RXBAS_SDBE_DISABLE
-#define CFG_SDRAM0_MB3CF SDRAM_RXBAS_SDBE_DISABLE
-#define CFG_SDRAM0_MCOPT1 0x04322000
-#define CFG_SDRAM0_MCOPT2 0x00000000
-#define CFG_SDRAM0_MODT0 0x01800000
-#define CFG_SDRAM0_MODT1 0x00000000
-#define CFG_SDRAM0_CODT 0x0080f837
-#define CFG_SDRAM0_RTR 0x06180000
-#define CFG_SDRAM0_INITPLR0 0xa8380000
-#define CFG_SDRAM0_INITPLR1 0x81900400
-#define CFG_SDRAM0_INITPLR2 0x81020000
-#define CFG_SDRAM0_INITPLR3 0x81030000
-#define CFG_SDRAM0_INITPLR4 0x81010404
-#define CFG_SDRAM0_INITPLR5 0x81000542
-#define CFG_SDRAM0_INITPLR6 0x81900400
-#define CFG_SDRAM0_INITPLR7 0x8D080000
-#define CFG_SDRAM0_INITPLR8 0x8D080000
-#define CFG_SDRAM0_INITPLR9 0x8D080000
-#define CFG_SDRAM0_INITPLR10 0x8D080000
-#define CFG_SDRAM0_INITPLR11 0x81000442
-#define CFG_SDRAM0_INITPLR12 0x81010780
-#define CFG_SDRAM0_INITPLR13 0x81010400
-#define CFG_SDRAM0_INITPLR14 0x00000000
-#define CFG_SDRAM0_INITPLR15 0x00000000
-#define CFG_SDRAM0_RQDC 0x80000038
-#define CFG_SDRAM0_RFDC 0x00000209
-#define CFG_SDRAM0_RDCC 0x40000000
-#define CFG_SDRAM0_DLCR 0x030000a5
-#define CFG_SDRAM0_CLKTR 0x80000000
-#define CFG_SDRAM0_WRDTR 0x00000000
-#define CFG_SDRAM0_SDTR1 0x80201000
-#define CFG_SDRAM0_SDTR2 0x32204232
-#define CFG_SDRAM0_SDTR3 0x080b0d1a
-#define CFG_SDRAM0_MMODE 0x00000442
-#define CFG_SDRAM0_MEMODE 0x00000404
+#define CONFIG_SYS_SDRAM0_MB2CF SDRAM_RXBAS_SDBE_DISABLE
+#define CONFIG_SYS_SDRAM0_MB3CF SDRAM_RXBAS_SDBE_DISABLE
+#define CONFIG_SYS_SDRAM0_MCOPT1 0x04322000
+#define CONFIG_SYS_SDRAM0_MCOPT2 0x00000000
+#define CONFIG_SYS_SDRAM0_MODT0 0x01800000
+#define CONFIG_SYS_SDRAM0_MODT1 0x00000000
+#define CONFIG_SYS_SDRAM0_CODT 0x0080f837
+#define CONFIG_SYS_SDRAM0_RTR 0x06180000
+#define CONFIG_SYS_SDRAM0_INITPLR0 0xa8380000
+#define CONFIG_SYS_SDRAM0_INITPLR1 0x81900400
+#define CONFIG_SYS_SDRAM0_INITPLR2 0x81020000
+#define CONFIG_SYS_SDRAM0_INITPLR3 0x81030000
+#define CONFIG_SYS_SDRAM0_INITPLR4 0x81010404
+#define CONFIG_SYS_SDRAM0_INITPLR5 0x81000542
+#define CONFIG_SYS_SDRAM0_INITPLR6 0x81900400
+#define CONFIG_SYS_SDRAM0_INITPLR7 0x8D080000
+#define CONFIG_SYS_SDRAM0_INITPLR8 0x8D080000
+#define CONFIG_SYS_SDRAM0_INITPLR9 0x8D080000
+#define CONFIG_SYS_SDRAM0_INITPLR10 0x8D080000
+#define CONFIG_SYS_SDRAM0_INITPLR11 0x81000442
+#define CONFIG_SYS_SDRAM0_INITPLR12 0x81010780
+#define CONFIG_SYS_SDRAM0_INITPLR13 0x81010400
+#define CONFIG_SYS_SDRAM0_INITPLR14 0x00000000
+#define CONFIG_SYS_SDRAM0_INITPLR15 0x00000000
+#define CONFIG_SYS_SDRAM0_RQDC 0x80000038
+#define CONFIG_SYS_SDRAM0_RFDC 0x00000209
+#define CONFIG_SYS_SDRAM0_RDCC 0x40000000
+#define CONFIG_SYS_SDRAM0_DLCR 0x030000a5
+#define CONFIG_SYS_SDRAM0_CLKTR 0x80000000
+#define CONFIG_SYS_SDRAM0_WRDTR 0x00000000
+#define CONFIG_SYS_SDRAM0_SDTR1 0x80201000
+#define CONFIG_SYS_SDRAM0_SDTR2 0x32204232
+#define CONFIG_SYS_SDRAM0_SDTR3 0x080b0d1a
+#define CONFIG_SYS_SDRAM0_MMODE 0x00000442
+#define CONFIG_SYS_SDRAM0_MEMODE 0x00000404
/*-----------------------------------------------------------------------
* I2C
*----------------------------------------------------------------------*/
-#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */
-#define CFG_I2C_EEPROM_ADDR 0x52 /* I2C boot EEPROM (24C02BN) */
-#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* I2C boot EEPROM (24C02BN) */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
/* Standard DTT sensor configuration */
#define CONFIG_DTT_DS1775 1
#define CONFIG_DTT_SENSORS { 0 }
-#define CFG_I2C_DTT_ADDR 0x48
+#define CONFIG_SYS_I2C_DTT_ADDR 0x48
/* RTC configuration */
#define CONFIG_RTC_X1205 1
-#define CFG_I2C_RTC_ADDR 0x6f
+#define CONFIG_SYS_I2C_RTC_ADDR 0x6f
/*-----------------------------------------------------------------------
* Ethernet
*/
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DTT
-#define CONFIG_CMD_LOG
#define CONFIG_CMD_PCI
#define CONFIG_CMD_SNTP
/* POST support */
-#define CONFIG_POST (CFG_POST_CACHE | \
- CFG_POST_CPU | \
- CFG_POST_ETHER | \
- CFG_POST_I2C | \
- CFG_POST_MEMORY | \
- CFG_POST_UART)
+#define CONFIG_POST (CONFIG_SYS_POST_CACHE | \
+ CONFIG_SYS_POST_CPU | \
+ CONFIG_SYS_POST_ETHER | \
+ CONFIG_SYS_POST_I2C | \
+ CONFIG_SYS_POST_MEMORY | \
+ CONFIG_SYS_POST_UART)
/* Define here the base-addresses of the UARTs to test in POST */
-#define CFG_POST_UART_TABLE {UART0_BASE, UART1_BASE}
+#define CONFIG_SYS_POST_UART_TABLE { CONFIG_SYS_NS16550_COM1, \
+ CONFIG_SYS_NS16550_COM2 }
#define CONFIG_LOGBUFFER
-#define CFG_POST_CACHE_ADDR 0x00800000 /* free virtual address */
+#define CONFIG_SYS_POST_CACHE_ADDR 0x00800000 /* free virtual address */
-#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
/*-----------------------------------------------------------------------
* PCI stuff
/*-----------------------------------------------------------------------
* PCIe stuff
*----------------------------------------------------------------------*/
-#define CFG_PCIE_MEMBASE 0x90000000 /* mapped PCIe memory */
-#define CFG_PCIE_MEMSIZE 0x08000000 /* 128 Meg, smallest incr per port */
+#define CONFIG_SYS_PCIE_MEMBASE 0x90000000 /* mapped PCIe memory */
+#define CONFIG_SYS_PCIE_MEMSIZE 0x08000000 /* 128 Meg, smallest incr per port */
-#define CFG_PCIE0_CFGBASE 0xa0000000 /* remote access */
-#define CFG_PCIE0_XCFGBASE 0xb0000000 /* local access */
-#define CFG_PCIE0_CFGMASK 0xe0000001 /* 512 Meg */
+#define CONFIG_SYS_PCIE0_CFGBASE 0xa0000000 /* remote access */
+#define CONFIG_SYS_PCIE0_XCFGBASE 0xb0000000 /* local access */
+#define CONFIG_SYS_PCIE0_CFGMASK 0xe0000001 /* 512 Meg */
-#define CFG_PCIE1_CFGBASE 0xc0000000 /* remote access */
-#define CFG_PCIE1_XCFGBASE 0xd0000000 /* local access */
-#define CFG_PCIE1_CFGMASK 0xe0000001 /* 512 Meg */
+#define CONFIG_SYS_PCIE1_CFGBASE 0xc0000000 /* remote access */
+#define CONFIG_SYS_PCIE1_XCFGBASE 0xd0000000 /* local access */
+#define CONFIG_SYS_PCIE1_CFGMASK 0xe0000001 /* 512 Meg */
-#define CFG_PCIE0_UTLBASE 0xef502000
-#define CFG_PCIE1_UTLBASE 0xef503000
+#define CONFIG_SYS_PCIE0_UTLBASE 0xef502000
+#define CONFIG_SYS_PCIE1_UTLBASE 0xef503000
/* base address of inbound PCIe window */
-#define CFG_PCIE_INBOUND_BASE 0x0000000000000000ULL
+#define CONFIG_SYS_PCIE_INBOUND_BASE 0x0000000000000000ULL
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
*----------------------------------------------------------------------*/
/* Memory Bank 0 (NOR-FLASH) initialization */
-#define CFG_EBC_PB0AP 0x08033700
-#define CFG_EBC_PB0CR (CFG_FLASH_BASE | 0xda000)
+#define CONFIG_SYS_EBC_PB0AP 0x08033700
+#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_FLASH_BASE | 0xda000)
/* Memory Bank 2 (CPLD) initialization */
-#define CFG_EBC_PB2AP 0x9400C800
-#define CFG_EBC_PB2CR 0xF0018000 /* BAS=0x800,BS=1MB,BU=R/W,BW=8bit */
+#define CONFIG_SYS_EBC_PB2AP 0x9400C800
+#define CONFIG_SYS_EBC_PB2CR 0xF0018000 /* BAS=0x800,BS=1MB,BU=R/W,BW=8bit */
-#define CFG_EBC_CFG 0x7FC00000 /* EBC0_CFG */
+#define CONFIG_SYS_EBC_CFG 0x7FC00000 /* EBC0_CFG */
/*-----------------------------------------------------------------------
* GPIO Setup
*----------------------------------------------------------------------*/
-#define CFG_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \
+#define CONFIG_SYS_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \
{ \
/* GPIO Core 0 */ \
{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO0 EBC_DATA_PAR(0) */ \
} \
}
-#define CFG_GPIO_PCIE_RST 23
-#define CFG_GPIO_PCIE_CLKREQ 27
-#define CFG_GPIO_PCIE_WAKE 28
+#define CONFIG_SYS_GPIO_PCIE_RST 23
+#define CONFIG_SYS_GPIO_PCIE_CLKREQ 27
+#define CONFIG_SYS_GPIO_PCIE_WAKE 28
#endif /* __CONFIG_H */
projects / karo-tx-uboot.git / blobdiff