karo: tx6: enable GPT command

[karo-tx-uboot.git] / include / configs / microblaze-generic.h

diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 622bc951045b991b6f1e11f4ee4c1734a42ec7e7..8ce1c497077032f8aaae487b7bdd941c8b49a8f8 100644 (file)
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -106,13 +106,20 @@
 # define CONFIG_XILINX_TB_WATCHDOG
 #endif
 
-#ifndef CONFIG_OF_CONTROL
+#if !defined(CONFIG_OF_CONTROL) || \
+       (defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_OF_CONTROL))
 /* ddr sdram - main memory */
 # define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START
 # define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE
 #endif
 
 #define CONFIG_SYS_MALLOC_LEN  0xC0000
+#ifndef CONFIG_SPL_BUILD
+# define CONFIG_SYS_MALLOC_F_LEN       1024
+#else
+# define CONFIG_SYS_MALLOC_SIMPLE
+# define CONFIG_SYS_MALLOC_F_LEN       0x150
+#endif
 
 /* Stack location before relocation */
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_TEXT_BASE
@@ -170,7 +177,6 @@
 # define CONFIG_SYS_SPI_BASE           XILINX_SPI_FLASH_BASEADDR
 # define CONFIG_XILINX_SPI             1
 # define CONFIG_SPI                    1
-# define CONFIG_SPI_FLASH              1
 # define CONFIG_SPI_FLASH_STMICRO      1
 # define CONFIG_SF_DEFAULT_MODE                SPI_MODE_3
 # define CONFIG_SF_DEFAULT_SPEED       XILINX_SPI_FLASH_MAX_FREQ
@@ -239,12 +245,9 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_MFSL
-#define CONFIG_CMD_ECHO
 #define CONFIG_CMD_GPIO
 
 #if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE)
@@ -253,10 +256,7 @@
 # undef CONFIG_CMD_CACHE
 #endif
 
-#ifndef CONFIG_SYS_ENET
-# undef CONFIG_CMD_NET
-# undef CONFIG_CMD_NFS
-#else
+#ifdef CONFIG_SYS_ENET
 # define CONFIG_CMD_PING
 # define CONFIG_CMD_DHCP
 # define CONFIG_CMD_TFTPPUT
@@ -268,15 +268,11 @@
 #endif
 
 #if defined(FLASH)
-# define CONFIG_CMD_ECHO
-# define CONFIG_CMD_FLASH
-# define CONFIG_CMD_IMLS
 # define CONFIG_CMD_JFFS2
 # define CONFIG_CMD_UBI
 # undef CONFIG_CMD_UBIFS
 
 # if !defined(RAMENV)
-#  define CONFIG_CMD_SAVEENV
 #  define CONFIG_CMD_SAVES
 # endif
 
@@ -285,12 +281,9 @@
 # define CONFIG_CMD_SF
 
 # if !defined(RAMENV)
-#  define CONFIG_CMD_SAVEENV
 #  define CONFIG_CMD_SAVES
 # endif
 #else
-# undef CONFIG_CMD_IMLS
-# undef CONFIG_CMD_FLASH
 # undef CONFIG_CMD_JFFS2
 # undef CONFIG_CMD_UBI
 # undef CONFIG_CMD_UBIFS
@@ -324,8 +317,6 @@
                                "1m(cramfs),-(jffs2)"
 #endif
 
-/* Miscellaneous configurable options */
-#define        CONFIG_SYS_PROMPT       "U-Boot-mONStR> "
 /* size of console buffer */
 #define        CONFIG_SYS_CBSIZE       512
  /* print buffer size */
@@ -344,7 +335,6 @@
 #define        CONFIG_IPADDR           192.168.0.3
 #define        CONFIG_SERVERIP         192.168.0.5
 #define        CONFIG_GATEWAYIP        192.168.0.1
-#define        CONFIG_ETHADDR          00:E0:0C:00:00:FD
 
 /* architecture dependent code */
 #define        CONFIG_SYS_USR_EXCEP    /* user exception */
@@ -425,25 +415,11 @@
 /* BRAM start */
 #define CONFIG_SYS_INIT_RAM_ADDR       0x0
 /* BRAM size - will be generated */
-#define CONFIG_SYS_INIT_RAM_SIZE       0x10000
-/* Stack pointer prior relocation, must situated at on-chip RAM */
-#define CONFIG_SYS_SPL_MALLOC_END      (CONFIG_SYS_INIT_RAM_ADDR + \
-                                        CONFIG_SYS_INIT_RAM_SIZE - \
-                                        GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_SPL_MALLOC_SIZE     0x100
+#define CONFIG_SYS_INIT_RAM_SIZE       0x100000
 
-/*
- * The main reason to do it in this way is that MALLOC_START
- * can't be defined - common/spl/spl.c
- */
-#if (CONFIG_SYS_SPL_MALLOC_SIZE != 0)
-# define CONFIG_SYS_SPL_MALLOC_START   (CONFIG_SYS_SPL_MALLOC_END - \
-                                        CONFIG_SYS_SPL_MALLOC_SIZE)
-# define CONFIG_SPL_STACK_ADDR         CONFIG_SYS_SPL_MALLOC_START
-#else
-# define CONFIG_SPL_STACK_ADDR         CONFIG_SYS_SPL_MALLOC_END
-#endif
+# define CONFIG_SPL_STACK_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
+                                        CONFIG_SYS_INIT_RAM_SIZE - \
+                                        CONFIG_SYS_MALLOC_F_LEN)
 
 /* Just for sure that there is a space for stack */
 #define CONFIG_SPL_STACK_SIZE          0x100
@@ -452,8 +428,7 @@
 
 #define CONFIG_SPL_MAX_FOOTPRINT       (CONFIG_SYS_INIT_RAM_SIZE - \
                                         CONFIG_SYS_INIT_RAM_ADDR - \
-                                        GENERATED_GBL_DATA_SIZE - \
-                                        CONFIG_SYS_SPL_MALLOC_SIZE - \
+                                        CONFIG_SYS_MALLOC_F_LEN - \
                                         CONFIG_SPL_STACK_SIZE)
 
 #endif /* __CONFIG_H */