tricorder: panic() on unknown board

[karo-tx-uboot.git] / include / configs / mpc5121ads.h

diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index c3d3afde0e0f94328dead73fa93fb7e25741d252..2af947a23161eee3d3e8a5d1258bf3bddeacc1b8 100644 (file)
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -1,23 +1,7 @@
 /*
  * (C) Copyright 2007-2009 DENX Software Engineering
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -242,7 +226,6 @@
 #define CONFIG_SYS_NAND_BASE            0x40000000
 
 #define CONFIG_SYS_MAX_NAND_DEVICE      2
-#define NAND_MAX_CHIPS                  CONFIG_SYS_MAX_NAND_DEVICE
 #define CONFIG_SYS_NAND_SELECT_DEVICE  /* driver supports mutipl. chips */
 
 /*
@@ -259,6 +242,8 @@
  */
 #define CONFIG_SYS_CPLD_BASE           0x82000000
 #define CONFIG_SYS_CPLD_SIZE           0x00010000      /* 64 KB */
+#define CONFIG_SYS_CS2_START           CONFIG_SYS_CPLD_BASE
+#define CONFIG_SYS_CS2_SIZE            CONFIG_SYS_CPLD_SIZE
 
 #define CONFIG_SYS_SRAM_BASE           0x30000000
 #define CONFIG_SYS_SRAM_SIZE           0x00020000      /* 128 KB */
@@ -291,6 +276,7 @@
  * Serial console configuration
  */
 #define CONFIG_PSC_CONSOLE     3       /* console is on PSC3 */
+#define CONFIG_SYS_PSC3
 #if CONFIG_PSC_CONSOLE != 3
 #error CONFIG_PSC_CONSOLE must be 3
 #endif
@@ -307,13 +293,34 @@
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
 #ifdef  CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
+/*
+ * Clocks in use
+ */
+#define SCCR1_CLOCKS_EN        (CLOCK_SCCR1_CFG_EN |                           \
+                        CLOCK_SCCR1_DDR_EN |                           \
+                        CLOCK_SCCR1_FEC_EN |                           \
+                        CLOCK_SCCR1_LPC_EN |                           \
+                        CLOCK_SCCR1_NFC_EN |                           \
+                        CLOCK_SCCR1_PATA_EN |                          \
+                        CLOCK_SCCR1_PCI_EN |                           \
+                        CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) |       \
+                        CLOCK_SCCR1_PSCFIFO_EN |                       \
+                        CLOCK_SCCR1_TPR_EN)
+
+#define SCCR2_CLOCKS_EN        (CLOCK_SCCR2_DIU_EN |           \
+                        CLOCK_SCCR2_I2C_EN |           \
+                        CLOCK_SCCR2_MEM_EN |           \
+                        CLOCK_SCCR2_SPDIF_EN |         \
+                        CLOCK_SCCR2_USB1_EN |          \
+                        CLOCK_SCCR2_USB2_EN)
+
 /*
  * PCI
  */
 #ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
 
 /*
  * General PCI
@@ -337,7 +344,6 @@
 
 /* I2C */
 #define CONFIG_HARD_I2C                        /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C                 /* so disable bit-banged I2C */
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_I2C_SPEED           100000  /* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE           0x7F
@@ -348,7 +354,7 @@
 /*
  * IIM - IC Identification Module
  */
-#undef CONFIG_IIM
+#undef CONFIG_FSL_IIM
 
 /*
  * EEPROM configuration