#ifndef __MS7722SE_H
#define __MS7722SE_H
-#undef DEBUG
#define CONFIG_SH 1
#define CONFIG_SH4 1
#define CONFIG_CPU_SH7722 1
#define CONFIG_MS7722SE 1
#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
-#define CONFIG_CMD_DFL
#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_ENV
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_SAVEENV
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01"
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.0.22
-#define CONFIG_SERVERIP 192.168.0.1
-#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01"
#define CONFIG_VERSION_VARIABLE
#undef CONFIG_SHOW_BOOT_PROGRESS
/* SMC9111 */
-#define CONFIG_DRIVER_SMC91111
+#define CONFIG_SMC91111
#define CONFIG_SMC91111_BASE (0xB8000000)
/* MEMORY */
#define MS7722SE_SDRAM_BASE (0x8C000000)
#define MS7722SE_FLASH_BASE_1 (0xA0000000)
-//#define MS7722SE_FLASH_BASE_1 (0xA1000000)
#define MS7722SE_FLASH_BANK_SIZE (8*1024 * 1024)
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Buffer size for input from the Console */
-#define CFG_PBSIZE 256 /* Buffer size for Console output */
-#define CFG_MAXARGS 16 /* max args accepted for monitor commands */
-#define CFG_BARGSIZE 512 /* Buffer size for Boot Arguments passed to kernel */
-#define CFG_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */
+#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */
+#define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */
+#define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */
+#define CONFIG_SYS_BARGSIZE 512 /* Buffer size for Boot Arguments passed to kernel */
+#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */
/* SCIF */
-#define CFG_SCIF_CONSOLE 1
+#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_CONS_SCIF0 1
-#undef CFG_CONSOLE_INFO_QUIET /* Suppress display of console information at boot */
-#undef CFG_CONSOLE_OVERWRITE_ROUTINE
-#undef CFG_CONSOLE_ENV_OVERWRITE
+#undef CONFIG_SYS_CONSOLE_INFO_QUIET /* Suppress display of console information at boot */
+#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
-#define CFG_MEMTEST_START (MS7722SE_SDRAM_BASE)
-#define CFG_MEMTEST_END (CFG_MEMTEST_START + (60 * 1024 * 1024))
+#define CONFIG_SYS_MEMTEST_START (MS7722SE_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
-#undef CFG_ALT_MEMTEST /* Enable alternate, more extensive, memory test */
-#undef CFG_MEMTEST_SCRATCH /* Scratch address used by the alternate memory test */
+#undef CONFIG_SYS_ALT_MEMTEST /* Enable alternate, more extensive, memory test */
+#undef CONFIG_SYS_MEMTEST_SCRATCH /* Scratch address used by the alternate memory test */
-#undef CFG_LOADS_BAUD_CHANGE /* Enable temporary baudrate change while serial download */
+#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* Enable temporary baudrate change while serial download */
-#define CFG_SDRAM_BASE (MS7722SE_SDRAM_BASE)
-#define CFG_SDRAM_SIZE (64 * 1024 * 1024) /* maybe more, but if so u-boot doesn't know about it... */
+#define CONFIG_SYS_SDRAM_BASE (MS7722SE_SDRAM_BASE)
+#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) /* maybe more, but if so u-boot doesn't know about it... */
-#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024) /* default load address for scripts ?!? */
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) /* default load address for scripts ?!? */
-#define CFG_MONITOR_BASE (MS7722SE_FLASH_BASE_1) /* Address of u-boot image
- in Flash (NOT run time address in SDRAM) ?!? */
-#define CFG_MONITOR_LEN (128 * 1024) /* */
-#define CFG_MALLOC_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */
-#define CFG_GBL_DATA_SIZE (256) /* size in bytes reserved for initial data */
-#define CFG_BOOTMAPSZ (8 * 1024 * 1024)
+#define CONFIG_SYS_MONITOR_BASE (MS7722SE_FLASH_BASE_1) /* Address of u-boot image
+ in Flash (NOT run time address in SDRAM) ?!? */
+#define CONFIG_SYS_MONITOR_LEN (128 * 1024) /* */
+#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */
+#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
/* FLASH */
-#define CFG_FLASH_CFI
-#define CFG_FLASH_CFI_DRIVER
-#undef CFG_FLASH_QUIET_TEST
-#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#undef CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_BASE (MS7722SE_FLASH_BASE_1) /* Physical start address of Flash memory */
+#define CONFIG_SYS_FLASH_BASE (MS7722SE_FLASH_BASE_1) /* Physical start address of Flash memory */
-#define CFG_MAX_FLASH_SECT 150 /* Max number of sectors on each
- Flash chip */
+#define CONFIG_SYS_MAX_FLASH_SECT 150 /* Max number of sectors on each
+ Flash chip */
/* if you use all NOR Flash , you change dip-switch. Please see MS7722SE01 Manual. */
-#define CFG_MAX_FLASH_BANKS 2
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE + (0 * MS7722SE_FLASH_BANK_SIZE), \
- CFG_FLASH_BASE + (1 * MS7722SE_FLASH_BANK_SIZE), \
+#define CONFIG_SYS_MAX_FLASH_BANKS 2
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + (0 * MS7722SE_FLASH_BANK_SIZE), \
+ CONFIG_SYS_FLASH_BASE + (1 * MS7722SE_FLASH_BANK_SIZE), \
}
-#define CFG_FLASH_ERASE_TOUT (3 * 1000) /* Timeout for Flash erase operations (in ms) */
-#define CFG_FLASH_WRITE_TOUT (3 * 1000) /* Timeout for Flash write operations (in ms) */
-#define CFG_FLASH_LOCK_TOUT (3 * 1000) /* Timeout for Flash set sector lock bit operations (in ms) */
-#define CFG_FLASH_UNLOCK_TOUT (3 * 1000) /* Timeout for Flash clear lock bit operations (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) /* Timeout for Flash erase operations (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) /* Timeout for Flash write operations (in ms) */
+#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) /* Timeout for Flash set sector lock bit operations (in ms) */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) /* Timeout for Flash clear lock bit operations (in ms) */
-#undef CFG_FLASH_PROTECTION /* Use hardware flash sectors protection instead of U-Boot software protection */
+#undef CONFIG_SYS_FLASH_PROTECTION /* Use hardware flash sectors protection instead of U-Boot software protection */
-#undef CFG_DIRECT_FLASH_TFTP
+#undef CONFIG_SYS_DIRECT_FLASH_TFTP
-#define CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_OVERWRITE 1
-#define CFG_ENV_SECT_SIZE (8 * 1024)
-#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
-#define CFG_ENV_ADDR (CFG_FLASH_BASE + (1 * CFG_ENV_SECT_SIZE))
-#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) /* Offset of env Flash sector relative to CFG_FLASH_BASE */
-#define CFG_ENV_SIZE_REDUND (CFG_ENV_SECT_SIZE)
-#define CFG_ENV_ADDR_REDUND (CFG_FLASH_BASE + (2 * CFG_ENV_SECT_SIZE))
+#define CONFIG_ENV_SECT_SIZE (8 * 1024)
+#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE))
+#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) /* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
/* Board Clock */
#define CONFIG_SYS_CLK_FREQ 33333333
-#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */
-#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */
+#define CONFIG_SYS_HZ 1000
#endif /* __MS7722SE_H */
projects / karo-tx-uboot.git / blobdiff