/*
* Select serial console configuration
*/
+#define CONFIG_IMX_SERIAL
#define CONFIG_IMX_SERIAL1 /* internal uart 1 */
/* #define _CONFIG_UART2 */ /* internal uart 2 */
/* #define CONFIG_SILENT_CONSOLE */ /* use this to disable output */
-#define BOARD_LATE_INIT 1
+#define CONFIG_BOARD_LATE_INIT
#define USE_920T_MMU 1
#if 0
-#define CFG_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
-#define CFG_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
-#define CFG_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
+#define CONFIG_SYS_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
+#define CONFIG_SYS_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
+#define CONFIG_SYS_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
#endif
/*
* Size of malloc() pool
*/
-#define CFG_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
/*
* CS8900 Ethernet drivers
*/
-#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */
-#define CS8900_BASE 0x15000300
-#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
+#define CONFIG_CS8900 /* we have a CS8900 on-board */
+#define CONFIG_CS8900_BASE 0x15000300
+#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */
/*
* select serial console configuration
#define CONFIG_BAUDRATE 115200
-
/*
* BOOTP options
*/
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_ELF
-
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "root=/dev/msdk mem=48M"
#define CONFIG_BOOTFILE "mx1ads"
* Miscellaneous configurable options
*/
-#define CFG_HUSH_PARSER 1
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER 1
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT "MX1ADS$ " /* Monitor Command Prompt */
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT "MX1ADS$ " /* Monitor Command Prompt */
#else
-#define CFG_PROMPT "MX1ADS=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT "MX1ADS=> " /* Monitor Command Prompt */
#endif
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
/* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START 0x09000000 /* memtest works on */
-#define CFG_MEMTEST_END 0x0AF00000 /* 63 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START 0x09000000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x0AF00000 /* 63 MB in DRAM */
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-#define CFG_LOAD_ADDR 0x08800000 /* default load address */
-/*#define CFG_HZ 1000 */
-#define CFG_HZ 3686400
-#define CFG_CPUSPEED 0x141
+#define CONFIG_SYS_LOAD_ADDR 0x08800000 /* default load address */
+/*#define CONFIG_SYS_HZ 1000 */
+#define CONFIG_SYS_HZ 3686400
+#define CONFIG_SYS_CPUSPEED 0x141
/* valid baudrates */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*-----------------------------------------------------------------------
* Stack sizes
#define PHYS_SDRAM_1 0x08000000 /* SDRAM on CSD0 */
#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-#define CFG_MAX_FLASH_BANKS 1 /* 1 bank of SyncFlash */
-#define CFG_FLASH_BASE 0x0C000000 /* SyncFlash on CSD1 */
+#define CONFIG_SYS_TEXT_BASE 0x10000000
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0x00300000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x000FFFFF
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_GBL_DATA_OFFSET)
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* 1 bank of SyncFlash */
+#define CONFIG_SYS_FLASH_BASE 0x0C000000 /* SyncFlash on CSD1 */
#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */
/*-----------------------------------------------------------------------
#define CONFIG_SYNCFLASH 1
#define PHYS_FLASH_SIZE 0x01000000
-#define CFG_MAX_FLASH_SECT (16)
-#define CONFIG_ENV_ADDR (CFG_FLASH_BASE+0x00ff8000)
+#define CONFIG_SYS_MAX_FLASH_SECT (16)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+0x00ff8000)
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_SIZE 0x04000 /* Total Size of Environment Sector */
projects / karo-tx-uboot.git / blobdiff