*
* This is the Configuration setting for Motorola MX1ADS board
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
#define CONFIG_IMX 1 /* It's a Motorola MC9328 SoC */
#define CONFIG_MX1ADS 1 /* on a Motorola MX1ADS Board */
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
/*
* Select serial console configuration
*/
+#define CONFIG_IMX_SERIAL
#define CONFIG_IMX_SERIAL1 /* internal uart 1 */
/* #define _CONFIG_UART2 */ /* internal uart 2 */
/* #define CONFIG_SILENT_CONSOLE */ /* use this to disable output */
-#define BOARD_LATE_INIT 1
+#define CONFIG_BOARD_LATE_INIT
#define USE_920T_MMU 1
#if 0
-#define CFG_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
-#define CFG_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
-#define CFG_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
+#define CONFIG_SYS_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
+#define CONFIG_SYS_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
+#define CONFIG_SYS_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
#endif
/*
* Size of malloc() pool
*/
-#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
-
-
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
/*
* CS8900 Ethernet drivers
*/
-#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */
-#define CS8900_BASE 0x15000300
-#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
+#define CONFIG_CS8900 /* we have a CS8900 on-board */
+#define CONFIG_CS8900_BASE 0x15000300
+#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */
/*
* select serial console configuration
#define CONFIG_BAUDRATE 115200
-
/*
* BOOTP options
*/
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-
/*
* Command line configuration.
*/
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_ELF
-
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "root=/dev/msdk mem=48M"
#define CONFIG_BOOTFILE "mx1ads"
* Miscellaneous configurable options
*/
-#define CFG_HUSH_PARSER 1
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER 1
-#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT "MX1ADS$ " /* Monitor Command Prompt */
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT "MX1ADS$ " /* Monitor Command Prompt */
#else
-#define CFG_PROMPT "MX1ADS=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT "MX1ADS=> " /* Monitor Command Prompt */
#endif
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
/* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-
-#define CFG_MEMTEST_START 0x09000000 /* memtest works on */
-#define CFG_MEMTEST_END 0x0AF00000 /* 63 MB in DRAM */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-#define CFG_LOAD_ADDR 0x08800000 /* default load address */
-/*#define CFG_HZ 1000 */
-#define CFG_HZ 3686400
-#define CFG_CPUSPEED 0x141
+#define CONFIG_SYS_MEMTEST_START 0x09000000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x0AF00000 /* 63 MB in DRAM */
-/* valid baudrates */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
+#define CONFIG_SYS_LOAD_ADDR 0x08800000 /* default load address */
+#define CONFIG_SYS_HZ 3686400
+#define CONFIG_SYS_CPUSPEED 0x141
/*-----------------------------------------------------------------------
* Physical Memory Map
#define PHYS_SDRAM_1 0x08000000 /* SDRAM on CSD0 */
#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-#define CFG_MAX_FLASH_BANKS 1 /* 1 bank of SyncFlash */
-#define CFG_FLASH_BASE 0x0C000000 /* SyncFlash on CSD1 */
+#define CONFIG_SYS_TEXT_BASE 0x10000000
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0x00300000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x000FFFFF
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_GBL_DATA_OFFSET)
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* 1 bank of SyncFlash */
+#define CONFIG_SYS_FLASH_BASE 0x0C000000 /* SyncFlash on CSD1 */
#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */
/*-----------------------------------------------------------------------
#define CONFIG_SYNCFLASH 1
#define PHYS_FLASH_SIZE 0x01000000
-#define CFG_MAX_FLASH_SECT (16)
-#define CFG_ENV_ADDR (CFG_FLASH_BASE+0x00ff8000)
+#define CONFIG_SYS_MAX_FLASH_SECT (16)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+0x00ff8000)
#define CONFIG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_SIZE 0x04000 /* Total Size of Environment Sector */
-#define CFG_ENV_SECT_SIZE 0x100000
+#define CONFIG_ENV_SIZE 0x04000 /* Total Size of Environment Sector */
+#define CONFIG_ENV_SECT_SIZE 0x100000
/*-----------------------------------------------------------------------
* Enable passing ATAGS
projects / karo-tx-uboot.git / blobdiff