sandbox: convert to common time functions

[karo-tx-uboot.git] / include / configs / mx1ads.h

diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
index f136b0ca8c6e2b8487edfcdaa3086c609265b1e2..c15d54631a592dadbbb65eb6cdcf989a2c2b1edd 100644 (file)
--- a/include/configs/mx1ads.h
+++ b/include/configs/mx1ads.h
@@ -9,20 +9,7 @@
  *
  * This is the Configuration setting for Motorola MX1ADS board
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -35,16 +22,16 @@
 #define CONFIG_ARM920T         1       /* This is an ARM920T Core              */
 #define CONFIG_IMX             1       /* It's a Motorola MC9328 SoC           */
 #define CONFIG_MX1ADS          1       /* on a Motorola MX1ADS Board           */
-#undef CONFIG_USE_IRQ                  /* we don't need IRQ/FIQ stuff          */
 
 /*
  * Select serial console configuration
   */
+#define CONFIG_IMX_SERIAL
 #define CONFIG_IMX_SERIAL1             /* internal uart 1 */
 /* #define _CONFIG_UART2 */            /* internal uart 2 */
 /* #define CONFIG_SILENT_CONSOLE */    /* use this to disable output */
 
-#define BOARD_LATE_INIT                1
+#define CONFIG_BOARD_LATE_INIT
 #define USE_920T_MMU           1
 
 #if 0
@@ -59,15 +46,12 @@
 
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 128*1024)
 
-
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
-
 /*
  *  CS8900 Ethernet drivers
  */
-#define CONFIG_DRIVER_CS8900   1       /* we have a CS8900 on-board */
-#define CS8900_BASE            0x15000300
-#define CS8900_BUS16           1       /* the Linux driver does accesses as shorts */
+#define CONFIG_CS8900          /* we have a CS8900 on-board */
+#define CONFIG_CS8900_BASE     0x15000300
+#define CONFIG_CS8900_BUS16    /* the Linux driver does accesses as shorts */
 
 /*
  * select serial console configuration
@@ -78,7 +62,6 @@
 
 #define CONFIG_BAUDRATE                115200
 
-
 /*
  * BOOTP options
  */
@@ -87,7 +70,6 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
@@ -97,7 +79,6 @@
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_ELF
 
-
 #define CONFIG_BOOTDELAY       3
 #define CONFIG_BOOTARGS                "root=/dev/msdk mem=48M"
 #define CONFIG_BOOTFILE                "mx1ads"
@@ -114,7 +95,6 @@
  */
 
 #define CONFIG_SYS_HUSH_PARSER         1
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 
 #define CONFIG_SYS_LONGHELP                            /* undef to save memory         */
 
@@ -133,26 +113,10 @@
 #define CONFIG_SYS_MEMTEST_START       0x09000000      /* memtest works on     */
 #define CONFIG_SYS_MEMTEST_END         0x0AF00000      /* 63 MB in DRAM        */
 
-#undef CONFIG_SYS_CLKS_IN_HZ                           /* everything, incl board info, in Hz */
 #define CONFIG_SYS_LOAD_ADDR           0x08800000      /* default load address */
-/*#define      CONFIG_SYS_HZ                   1000 */
 #define CONFIG_SYS_HZ                  3686400
 #define CONFIG_SYS_CPUSPEED            0x141
 
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128*1024)      /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ   (4*1024)        /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ   (4*1024)        /* FIQ stack */
-#endif
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
@@ -161,6 +125,16 @@
 #define PHYS_SDRAM_1           0x08000000      /* SDRAM  on CSD0               */
 #define PHYS_SDRAM_1_SIZE      0x04000000      /* 64 MB                        */
 
+#define CONFIG_SYS_TEXT_BASE   0x10000000
+
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR       0x00300000
+#define CONFIG_SYS_INIT_RAM_SIZE       0x000FFFFF
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - \
+                                               GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR        (CONFIG_SYS_INIT_RAM_ADDR + \
+                                               CONFIG_SYS_GBL_DATA_OFFSET)
+
 #define CONFIG_SYS_MAX_FLASH_BANKS     1               /* 1 bank of SyncFlash          */
 #define CONFIG_SYS_FLASH_BASE          0x0C000000      /* SyncFlash on CSD1            */
 #define FLASH_BANK_SIZE                0x01000000      /* 16 MB Total                  */