mx31ads: Use the new relocation scheme

[karo-tx-uboot.git] / include / configs / mx31ads.h

diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index 363ea1ba1fe62b2d5777a2064fee599ae249a223..6d6c1bd267ddb08caa05a71164381aaac5e572fa 100644 (file)
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -22,7 +22,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/arch/mx31-regs.h>
+#include <asm/arch/imx-regs.h>
 
  /* High Level Configuration Options */
 #define CONFIG_ARM1136         1               /* This is an arm1136 CPU core */
@@ -33,6 +33,8 @@
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
+#define CONFIG_SYS_TEXT_BASE           0xA0000000
+
 /*
  * Disabled for now due to build problems under Debian and a significant increase
  * in the final file size: 144260 vs. 109536 Bytes.
@@ -51,7 +53,6 @@
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 128 * 1024)
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -63,12 +64,14 @@
 #define CONFIG_HARD_SPI                1
 #define CONFIG_MXC_SPI         1
 #define CONFIG_DEFAULT_SPI_BUS 1
-#define CONFIG_DEFAULT_SPI_MODE        (SPI_MODE_2 | SPI_CS_HIGH)
+#define CONFIG_DEFAULT_SPI_MODE        (SPI_MODE_0 | SPI_CS_HIGH)
 
+#define CONFIG_FSL_PMIC
+#define CONFIG_FSL_PMIC_BUS    1
+#define CONFIG_FSL_PMIC_CS     0
+#define CONFIG_FSL_PMIC_CLK    1000000
+#define CONFIG_FSL_PMIC_MODE   (SPI_MODE_0 | SPI_CS_HIGH)
 #define CONFIG_RTC_MC13783     1
-/* MC13783 connected to CSPI2 and SS0 */
-#define CONFIG_MC13783_SPI_BUS 1
-#define CONFIG_MC13783_SPI_CS  0
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -109,9 +112,10 @@
                "cp.b ${loadaddr} ${uboot_addr} ${filesize}; "          \
                "setenv filesize; saveenv\0"
 
-#define CONFIG_DRIVER_CS8900   1
-#define CS8900_BASE            0xb4020300
-#define CS8900_BUS16           1       /* follow the Linux driver */
+#define CONFIG_NET_MULTI
+#define CONFIG_CS8900
+#define CONFIG_CS8900_BASE     0xb4020300
+#define CONFIG_CS8900_BUS16            1       /* follow the Linux driver */
 
 /*
  * The MX31ADS board seems to have a hardware "peculiarity" confirmed under
@@ -158,6 +162,15 @@
 #define CONFIG_NR_DRAM_BANKS   1
 #define PHYS_SDRAM_1           CSD0_BASE
 #define PHYS_SDRAM_1_SIZE      (128 * 1024 * 1024)
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - \
+                                               GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR        (CONFIG_SYS_INIT_RAM_ADDR + \
+                                               CONFIG_SYS_GBL_DATA_OFFSET)
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization