Merge branch 'master' of git://git.denx.de/u-boot into master

[karo-tx-uboot.git] / include / configs / mx35pdk.h

diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index bd57baa808ff1c4f76735ec7c6555097b3b11aa2..88b2bd6ed4407a76c720c8eb03af539e41460388 100644 (file)
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -31,7 +31,6 @@
  /* High Level Configuration Options */
 #define CONFIG_ARM1136 /* This is an arm1136 CPU core */
 #define CONFIG_MX35
-#define CONFIG_MX35_HCLK_FREQ  24000000
 
 #define CONFIG_DISPLAY_CPUINFO
 
@@ -57,9 +56,8 @@
  */
 #define CONFIG_HARD_I2C
 #define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_MX35_PORT1
+#define CONFIG_SYS_I2C_BASE            I2C1_BASE_ADDR
 #define CONFIG_SYS_I2C_SPEED           100000
-#define CONFIG_SYS_I2C_SLAVE           0xfe
 #define CONFIG_MXC_SPI
 #define CONFIG_MXC_GPIO
 
@@ -67,9 +65,10 @@
 /*
  * PMIC Configs
  */
-#define CONFIG_PMIC
-#define CONFIG_PMIC_I2C
-#define CONFIG_PMIC_FSL
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_FSL
+#define CONFIG_PMIC_FSL_MC13892
 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR   0x08
 #define CONFIG_RTC_MC13XXX
 
@@ -89,7 +88,6 @@
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX      1
 #define CONFIG_BAUDRATE                115200
-#define CONFIG_SYS_BAUDRATE_TABLE      {9600, 19200, 38400, 57600, 115200}
 
 /*
  * Command definition
@@ -97,6 +95,7 @@
 
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_BOOTP_SUBNETMASK
@@ -113,7 +112,15 @@
 #define CONFIG_NET_RETRY_COUNT 100
 #define CONFIG_CMD_DATE
 
-#define CONFIG_BOOTDELAY       3
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_MMC
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+
+#define CONFIG_BOOTDELAY       1
 
 #define CONFIG_LOADADDR                0x80800000      /* loadaddr env var */
 
@@ -135,7 +142,6 @@
 #define CONFIG_FEC_MXC_PHYADDR 0x1F
 
 #define CONFIG_MII
-#define CONFIG_DISCOVER_PHY
 
 #define CONFIG_ARP_TIMEOUT     200UL
 
@@ -146,7 +152,6 @@
 #define CONFIG_SYS_PROMPT      "MX35 U-Boot > "
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
-#define        CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE      256     /* Console I/O Buffer Size */
@@ -164,14 +169,6 @@
 
 #define CONFIG_SYS_HZ                          1000
 
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 * 1024)    /* regular stack */
-
 /*
  * Physical Memory Map
  */
@@ -243,19 +240,35 @@
  * NAND FLASH driver setup
  */
 #define CONFIG_NAND_MXC
-#define CONFIG_NAND_MXC_V1_1
 #define CONFIG_MXC_NAND_REGS_BASE      (NFC_BASE_ADDR)
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           (NFC_BASE_ADDR)
 #define CONFIG_MXC_NAND_HWECC
 #define CONFIG_SYS_NAND_LARGEPAGE
 
+/* EHCI driver */
+#define CONFIG_USB_EHCI
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     1
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_EHCI_MXC
+#define CONFIG_MXC_USB_PORT    0
+#define CONFIG_MXC_USB_FLAGS   (MXC_EHCI_INTERFACE_DIFF_UNI | \
+                                MXC_EHCI_POWER_PINS_ENABLED | \
+                                MXC_EHCI_OC_PIN_ACTIVE_LOW)
+#define CONFIG_MXC_USB_PORTSC  (MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI)
+
+/* mmc driver */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR      0
+#define CONFIG_SYS_FSL_ESDHC_NUM       1
+
 /*
  * Default environment and default scripts
  * to update uboot and load kernel
  */
-#define xstr(s)        str(s)
-#define str(s) #s
 
 #define CONFIG_HOSTNAME "mx35pdk"
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
@@ -269,16 +282,16 @@
                ":${hostname}:${netdev}:off panic=1\0"                  \
        "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"               \
        "addip=if test -n ${ipdyn};then run addip_dyn;"                 \
-               "else run addip_sta;fi\0"       \
+               "else run addip_sta;fi\0"                               \
        "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
        "addtty=setenv bootargs ${bootargs}"                            \
                " console=ttymxc0,${baudrate}\0"                        \
        "addmisc=setenv bootargs ${bootargs} ${misc}\0"                 \
        "loadaddr=80800000\0"                                           \
        "kernel_addr_r=80800000\0"                                      \
-       "hostname=" xstr(CONFIG_HOSTNAME) "\0"                          \
-       "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0"                   \
-       "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0"             \
+       "hostname=" __stringify(CONFIG_HOSTNAME) "\0"                   \
+       "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"            \
+       "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"      \
        "flash_self=run ramargs addip addtty addmtd addmisc;"           \
                "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
        "flash_nfs=run nfsargs addip addtty addmtd addmisc;"            \
@@ -288,11 +301,11 @@
                "bootm ${kernel_addr_r}\0"                              \
        "net_self_load=tftp ${kernel_addr_r} ${bootfile};"              \
                "tftp ${ramdisk_addr_r} ${ramdisk_file};\0"             \
-       "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0"                 \
+       "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"          \
        "load=tftp ${loadaddr} ${u-boot}\0"                             \
-       "uboot_addr=" xstr(CONFIG_SYS_MONITOR_BASE) "\0"                \
-       "update=protect off ${uboot_addr} +40000;"                      \
-               "erase ${uboot_addr} +40000;"                           \
+       "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"         \
+       "update=protect off ${uboot_addr} +80000;"                      \
+               "erase ${uboot_addr} +80000;"                           \
                "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"          \
        "upd=if run load;then echo Updating u-boot;if run update;"      \
                "then echo U-Boot updated;"                             \