at91sam9260ek: move board id setup to config header

[karo-tx-uboot.git] / include / configs / mx53loco.h

diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index f936785cdc728ad21b21a6d1da0d59f952eef510..a4b610f9b7647997c4b11d5c09c93d457ec09164 100644 (file)
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -25,8 +25,6 @@
 
 #define CONFIG_MX53
 
-#define CONFIG_SYS_MX5_HCLK    24000000
-#define CONFIG_SYS_MX5_CLK32           32768
 #define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_MACH_TYPE       MACH_TYPE_MX53_LOCO
@@ -41,6 +39,7 @@
 #define CONFIG_SYS_MALLOC_LEN          (10 * 1024 * 1024)
 
 #define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_MXC_GPIO
 #define CONFIG_REVISION_TAG
 
@@ -60,9 +59,7 @@
 #define CONFIG_DOS_PARTITION
 
 /* Eth Configs */
-#define CONFIG_HAS_ETH1
 #define CONFIG_MII
-#define CONFIG_DISCOVER_PHY
 
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE   FEC_BASE_ADDR
@@ -89,14 +86,15 @@
 /* I2C Configs */
 #define CONFIG_HARD_I2C
 #define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_MX53_PORT1
+#define CONFIG_SYS_I2C_BASE            I2C1_BASE_ADDR
 #define CONFIG_SYS_I2C_SPEED           100000
 
 /* PMIC Controller */
-#define CONFIG_PMIC
-#define CONFIG_PMIC_I2C
-#define CONFIG_DIALOG_PMIC
-#define CONFIG_PMIC_FSL
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_DIALOG_POWER
+#define CONFIG_POWER_FSL
+#define CONFIG_PMIC_FSL_MC13892
 #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR        0x48
 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR   0x8
 
@@ -107,43 +105,77 @@
 
 /* Command definition */
 #include <config_cmd_default.h>
+#define CONFIG_CMD_BOOTZ
 
 #undef CONFIG_CMD_IMLS
 
-#define CONFIG_BOOTDELAY       3
+#define CONFIG_BOOTDELAY       1
 
 #define CONFIG_ETHPRIME                "FEC0"
 
-#define CONFIG_LOADADDR                0x70800000      /* loadaddr env var */
+#define CONFIG_LOADADDR                0x72000000      /* loadaddr env var */
 #define CONFIG_SYS_TEXT_BASE    0x77800000
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "script=boot.scr\0" \
        "uimage=uImage\0" \
+       "fdt_file=imx53-qsb.dtb\0" \
+       "fdt_addr=0x71000000\0" \
+       "boot_fdt=try\0" \
+       "ip_dyn=yes\0" \
        "mmcdev=0\0" \
        "mmcpart=2\0" \
-       "mmcroot=/dev/mmcblk0p3 rw\0" \
-       "mmcrootfstype=ext3 rootwait\0" \
-       "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \
-               "root=${mmcroot} " \
-               "rootfstype=${mmcrootfstype}\0" \
+       "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
+       "mmcargs=setenv bootargs console=ttymxc0,${baudrate} root=${mmcroot}\0" \
        "loadbootscript=" \
                "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
        "bootscript=echo Running bootscript from mmc ...; " \
                "source\0" \
        "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+       "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
        "mmcboot=echo Booting from mmc ...; " \
                "run mmcargs; " \
-               "bootm\0" \
+               "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+                       "if run loadfdt; then " \
+                               "bootm ${loadaddr} - ${fdt_addr}; " \
+                       "else " \
+                               "if test ${boot_fdt} = try; then " \
+                                       "bootm; " \
+                               "else " \
+                                       "echo WARN: Cannot load the DT; " \
+                               "fi; " \
+                       "fi; " \
+               "else " \
+                       "bootm; " \
+               "fi;\0" \
        "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
                "root=/dev/nfs " \
                "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
        "netboot=echo Booting from net ...; " \
                "run netargs; " \
-               "dhcp ${uimage}; bootm\0" \
+               "if test ${ip_dyn} = yes; then " \
+                       "setenv get_cmd dhcp; " \
+               "else " \
+                       "setenv get_cmd tftp; " \
+               "fi; " \
+               "${get_cmd} ${uimage}; " \
+               "if test ${boot_fdt} = yes ||  test ${boot_fdt} = try; then " \
+                       "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+                               "bootm ${loadaddr} - ${fdt_addr}; " \
+                       "else " \
+                               "if test ${boot_fdt} = try; then " \
+                                       "bootm; " \
+                               "else " \
+                                       "echo ERROR: Cannot load the DT; " \
+                                       "exit; " \
+                               "fi; " \
+                       "fi; " \
+               "else " \
+                       "bootm; " \
+               "fi;\0"
 
 #define CONFIG_BOOTCOMMAND \
-       "if mmc rescan ${mmcdev}; then " \
+       "mmc dev ${mmcdev}; if mmc rescan; then " \
                "if run loadbootscript; then " \
                        "run bootscript; " \
                "else " \
@@ -161,7 +193,7 @@
 #define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
 #define CONFIG_SYS_PROMPT              "MX53LOCO U-Boot > "
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
 
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
@@ -176,9 +208,6 @@
 #define CONFIG_SYS_HZ          1000
 #define CONFIG_CMDLINE_EDITING
 
-/* Stack sizes */
-#define CONFIG_STACKSIZE       (128 * 1024)    /* regular stack */
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS   2
 #define PHYS_SDRAM_1           CSD0_BASE_ADDR
@@ -222,10 +251,12 @@
 #define CONFIG_VIDEO_IPUV3
 #define CONFIG_CFB_CONSOLE
 #define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_IPUV3_CLK       133000000
+#define CONFIG_IPUV3_CLK       200000000
 
 #endif                         /* __CONFIG_H */