*
* Configuration settings for the Nokia RX-51 aka N900.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
*/
#define CONFIG_OMAP /* in a TI OMAP core */
-#define CONFIG_OMAP34XX /* which is a 34XX */
#define CONFIG_OMAP3430 /* which is in a 3430 */
#define CONFIG_OMAP3_RX51 /* working with RX51 */
#define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */
+#define CONFIG_OMAP_COMMON
+#define CONFIG_SYS_GENERIC_BOARD
+/* Common ARM Erratas */
+#define CONFIG_ARM_ERRATA_454179
+#define CONFIG_ARM_ERRATA_430973
+#define CONFIG_ARM_ERRATA_621766
#define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51
#define CONFIG_SDRC /* The chip has SDRC controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
#include <asm/arch/mem.h>
#include <linux/stringify.h>
#define CONFIG_DOS_PARTITION
/* USB */
-#define CONFIG_MUSB_UDC
-#define CONFIG_MUSB_HDC
+#define CONFIG_USB_MUSB_UDC
+#define CONFIG_USB_MUSB_HCD
#define CONFIG_USB_OMAP3
#define CONFIG_TWL4030_USB
#define CONFIG_SYS_NO_FLASH
/* commands to include */
-#include <config_cmd_default.h>
-
#define CONFIG_CMD_EXT2 /* EXT2 Support */
#define CONFIG_CMD_EXT4 /* EXT4 Support */
#define CONFIG_CMD_FAT /* FAT support */
#define CONFIG_CMDLINE_EDITING /* add command line history */
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
+#define CONFIG_CMD_BOOTMENU /* ANSI terminal Boot Menu */
#define CONFIG_CMD_CLEAR /* ANSI terminal clear screen command */
#ifdef ONENAND_SUPPORT
#endif
-/* commands not needed from config_cmd_default.h */
-#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
-#undef CONFIG_CMD_IMI /* iminfo */
-#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
-#undef CONFIG_CMD_NFS /* NFS support */
-#undef CONFIG_CMD_SAVEENV /* saveenv */
-#undef CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
-
#define CONFIG_OMAP3_SPI
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
/*
* TWL4030
#ifdef ONENAND_SUPPORT
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#define VIDEO_TSTC_FCT rx51_kp_tstc
#define VIDEO_GETC_FCT rx51_kp_getc
#ifndef __ASSEMBLY__
+struct stdio_dev;
int rx51_kp_init(void);
-int rx51_kp_tstc(void);
-int rx51_kp_getc(void);
+int rx51_kp_tstc(struct stdio_dev *sdev);
+int rx51_kp_getc(struct stdio_dev *sdev);
#endif
#ifndef MTDPARTS_DEFAULT
#endif
/* Environment information */
-#define CONFIG_BOOTDELAY 3
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
"usbtty=cdc_acm\0" \
"fi\0" \
"emmcboot=setenv mmcnum 1; run trymmcboot\0" \
"sdboot=setenv mmcnum 0; run trymmcboot\0" \
+ "menucmd=bootmenu\0" \
+ "bootmenu_0=Attached kernel=run attachboot\0" \
+ "bootmenu_1=Internal eMMC=run emmcboot\0" \
+ "bootmenu_2=External SD card=run sdboot\0" \
+ "bootmenu_3=U-Boot boot order=boot\0" \
+ "bootmenu_delay=30\0" \
""
#define CONFIG_PREBOOT \
- "if run slide; then true; else run attachboot; fi;" \
+ "setenv mmcnum 1; setenv mmcpart 1;" \
+ "setenv mmcscriptfile bootmenu.scr;" \
+ "if run switchmmc; then " \
+ "setenv mmcdone true;" \
+ "setenv mmctype fat;" \
+ "if run scriptload; then true; else " \
+ "setenv mmctype ext2;" \
+ "if run scriptload; then true; else " \
+ "setenv mmctype ext4;" \
+ "if run scriptload; then true; else " \
+ "setenv mmcdone false;" \
+ "fi;" \
+ "fi;" \
+ "fi;" \
+ "if ${mmcdone}; then " \
+ "run scriptboot;" \
+ "fi;" \
+ "fi;" \
+ "if run slide; then true; else " \
+ "setenv bootmenu_delay 0;" \
+ "setenv bootdelay 0;" \
+ "fi"
+
+#define CONFIG_POSTBOOTMENU \
+ "echo;" \
"echo Extra commands:;" \
"echo run sercon - Use serial port for control.;" \
"echo run usbcon - Use usbtty for control.;" \
"run attachboot;" \
"echo"
+#define CONFIG_BOOTDELAY 30
+#define CONFIG_MENU
+#define CONFIG_MENU_SHOW
+
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_SYS_PROMPT "Nokia RX-51 # "
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
*/
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
/*
* Stack sizes
projects / karo-tx-uboot.git / blobdiff