/* input clock of PLL */
#define CONFIG_SYS_CLK_FREQ 12000000 /* the OMAP1510 Innovator has 12MHz input clock */
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
#define CONFIG_MISC_INIT_R
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
/*
* Size of malloc() pool
*/
-#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
/*
* Hardware drivers
#define CONFIG_SMC9196_BASE 0x08000300
#define CONFIG_SMC9196_EXT_PHY
*/
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_LAN91C96
#define CONFIG_LAN91C96_BASE 0x08000300
#define CONFIG_LAN91C96_EXT_PHY
/*
* NS16550 Configuration
*/
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE (-4)
-#define CFG_NS16550_CLK (CONFIG_SYS_CLK_FREQ) /* can be 12M/32Khz or 48Mhz */
-#define CFG_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart on helen */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK (CONFIG_SYS_CLK_FREQ) /* can be 12M/32Khz or 48Mhz */
+#define CONFIG_SYS_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart on helen */
/*
* select serial console configuration
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/*
* Command line configuration.
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "console=ttyS0,115200n8 noinitrd root=/dev/nfs ip=bootp"
#define CONFIG_BOOTCOMMAND "bootp;tftp;bootm"
-#define CFG_AUTOLOAD "n" /* No autoload */
+#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "OMAP1510 Innovator # " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-
-#define CFG_MEMTEST_START 0x10000000 /* memtest works on */
-#define CFG_MEMTEST_END 0x12000000 /* 32 MB in DRAM */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "OMAP1510 Innovator # " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x12000000 /* 32 MB in DRAM */
-#define CFG_LOAD_ADDR 0x10000000 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x10000000 /* default load address */
-/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
+/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
* This time is further subdivided by a local divisor.
*/
-#define CFG_TIMERBASE 0xFFFEC500 /* use timer 1 */
-#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */
-#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
+#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE /* use timer 1 */
+#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ 1000
/*-----------------------------------------------------------------------
* Physical Memory Map
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define CFG_FLASH_BASE PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
+
+#define PHYS_SRAM 0x20000000
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
-#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
#define PHYS_FLASH_SIZE 0x01000000 /* 16MB */
#define PHYS_FLASH_SECT_SIZE (128*1024) /* Size of a sector (128kB) */
-#define CFG_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
-#define CFG_ENV_ADDR (CFG_FLASH_BASE + PHYS_FLASH_SECT_SIZE)
-#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */
-#define CFG_MONITOR_LEN PHYS_FLASH_SECT_SIZE /* Reserve 1 sector */
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE + PHYS_FLASH_SIZE }
+#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SECT_SIZE)
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */
+#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE /* Reserve 1 sector */
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE }
/*-----------------------------------------------------------------------
* FLASH driver setup
*/
-#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
-#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
-#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */
+#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */
+#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/mtd/cfi_flash.c */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
+#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */
/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Write */
+
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE /* Total Size of Environment Sector */
+#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_OFFSET ( CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN ) /* Environment after Monitor */
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE /* Total Size of Environment Sector */
-#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
-#define CFG_ENV_OFFSET ( CFG_MONITOR_BASE + CFG_MONITOR_LEN ) /* Environment after Monitor */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR PHYS_SRAM
#endif /* __CONFIG_H */
projects / karo-tx-uboot.git / blobdiff