]> git.kernelconcepts.de Git - karo-tx-uboot.git/blobdiff - include/configs/omap3_pandora.h
at91sam9260ek: move board id setup to config header
[karo-tx-uboot.git] / include / configs / omap3_pandora.h
index 39c87a8a181aeaf58c9676669a64d0f0e7e92012..b77ce25880dc33a94d04eb7e33b562fa91edfd0f 100644 (file)
 /*
  * High Level Configuration Options
  */
-#define CONFIG_ARMV7           1       /* This is an ARM V7 CPU core */
 #define CONFIG_OMAP            1       /* in a TI OMAP core */
 #define CONFIG_OMAP34XX                1       /* which is a 34XX */
-#define CONFIG_OMAP3430                1       /* which is in a 3430 */
 #define CONFIG_OMAP3_PANDORA   1       /* working with pandora */
+#define CONFIG_OMAP_GPIO
 
 #define CONFIG_SDRC    /* The chip has SDRC controller */
 
@@ -47,7 +46,6 @@
 #define V_OSCK                 26000000        /* Clock output from T2 */
 #define V_SCLK                 (V_OSCK >> 1)
 
-#undef CONFIG_USE_IRQ          /* no support for IRQs */
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_CMDLINE_TAG             1       /* enable passing of ATAGs */
 #define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      {4800, 9600, 19200, 38400, 57600, \
                                        115200}
+#define CONFIG_GENERIC_MMC             1
 #define CONFIG_MMC                     1
-#define CONFIG_OMAP3_MMC               1
+#define CONFIG_OMAP_HSMMC              1
 #define CONFIG_DOS_PARTITION           1
 
-/* DDR - I use Micron DDR */
-#define CONFIG_OMAP3_MICRON_DDR                1
-
 /* commands to include */
 #include <config_cmd_default.h>
 
 #define CONFIG_HARD_I2C                        1
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_SYS_I2C_SLAVE           1
-#define CONFIG_SYS_I2C_BUS             0
-#define CONFIG_SYS_I2C_BUS_SELECT      1
 #define CONFIG_DRIVER_OMAP34XX_I2C     1
 
 /*
        "usbtty=cdc_acm\0" \
        "loadaddr=0x82000000\0" \
        "bootargs=ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs " \
-       "rw rootflags=bulk_read console=ttyS0,115200n8 " \
-       "vram=6272K omapfb.vram=0:3000K\0" \
+               "rw rootflags=bulk_read vram=6272K omapfb.vram=0:3000K\0" \
        "mtdparts=" MTDPARTS_DEFAULT "\0" \
 
 #define CONFIG_BOOTCOMMAND \
-       "if mmc init && fatload mmc1 0 ${loadaddr} autoboot.scr || " \
+       "if mmc rescan && fatload mmc1 0 ${loadaddr} autoboot.scr || " \
                        "ext2load mmc1 0 ${loadaddr} autoboot.scr; then " \
                "source ${loadaddr}; " \
        "fi; " \
-       "ubi part boot && ubifsmount boot && ubifsload ${loadaddr} uImage && bootm ${loadaddr}"
+       "ubi part boot && ubifsmount ubi:boot && " \
+               "ubifsload ${loadaddr} uImage && bootm ${loadaddr}"
 
 #define CONFIG_AUTO_COMPLETE   1
 /*
  */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_SYS_PROMPT              "Pandora # "
-#define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
                                        sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
 #define CONFIG_SYS_HZ                  1000
 
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 << 10)     /* regular stack 128 KiB */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ   (4 << 10)       /* IRQ stack 4 KiB */
-#define CONFIG_STACKSIZE_FIQ   (4 << 10)       /* FIQ stack 4 KiB */
-#endif
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS   2       /* CS1 may or may not be populated */
 #define PHYS_SDRAM_1           OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE      (32 << 20)      /* at least 32 MiB */
 #define PHYS_SDRAM_2           OMAP34XX_SDRC_CS1
 
-/* SDRAM Bank Allocation method */
-#define SDRC_R_B_C             1
-
 #define CONFIG_SYS_TEXT_BASE           0x80008000
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_RAM_ADDR       0x4020f800
 #define CONFIG_ENV_OFFSET              SMNAND_ENV_OFFSET
 #define CONFIG_ENV_ADDR                        SMNAND_ENV_OFFSET
 
+#define CONFIG_SYS_CACHELINE_SIZE      64
+
 #endif                         /* __CONFIG_H */