karo: tx6: enable GPT command

[karo-tx-uboot.git] / include / configs / omap3_sdp3430.h

diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h
index 19c6a3d33a0096bec5bae9a8e423c7b828e605f2..f43e477ad25f5863ba45f1021748671541867d19 100644 (file)
--- a/include/configs/omap3_sdp3430.h
+++ b/include/configs/omap3_sdp3430.h
@@ -7,23 +7,7 @@
  *
  * Configuration settings for the 3430 TI SDP3430 board.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -32,18 +16,22 @@
 /* TODO: REMOVE THE FOLLOWING
  * Retained the following till size.h is removed in u-boot
  */
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 /*
  * High Level Configuration Options
  */
 #define CONFIG_OMAP            1       /* in a TI OMAP core */
-#define CONFIG_OMAP34XX                1       /* which is a 34XX */
 #define CONFIG_OMAP3_3430SDP   1       /* working with SDP Rev2 */
+#define CONFIG_OMAP_COMMON
+/* Common ARM Erratas */
+#define CONFIG_ARM_ERRATA_454179
+#define CONFIG_ARM_ERRATA_430973
+#define CONFIG_ARM_ERRATA_621766
 
 #define CONFIG_SDRC    /* The chip has SDRC controller */
 
 #include <asm/arch/cpu.h>              /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
 
 /*
  * NOTE:  these #defines presume standard SDP jumper settings.
@@ -129,10 +117,10 @@
 /*
  * I2C for power management setup
  */
-#define CONFIG_HARD_I2C                        1
-#define CONFIG_SYS_I2C_SPEED           100000
-#define CONFIG_SYS_I2C_SLAVE           1
-#define CONFIG_DRIVER_OMAP34XX_I2C     1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED    100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE    1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /* OMITTED:  single 1 Gbit MT29F1G NAND flash */
 
@@ -160,9 +148,6 @@
 #define CONFIG_ENV_ADDR        (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_ENV_SECT_SIZE)
 /*--------------------------------------------------------------------------*/
 
-/* commands to include */
-#include <config_cmd_default.h>
-
 /* Enabled commands */
 #define CONFIG_CMD_DHCP                /* DHCP Support                 */
 #define CONFIG_CMD_EXT2                /* EXT2 Support                 */
@@ -170,11 +155,6 @@
 #define CONFIG_CMD_I2C         /* I2C serial bus support       */
 #define CONFIG_CMD_JFFS2       /* JFFS2 Support                */
 #define CONFIG_CMD_MMC         /* MMC support                  */
-#define CONFIG_CMD_NET
-
-/* Disabled commands */
-#undef CONFIG_CMD_FPGA         /* FPGA configuration Support   */
-#undef CONFIG_CMD_IMLS         /* List all found images        */
 
 /*--------------------------------------------------------------------------*/
 /*
@@ -260,7 +240,6 @@
 
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT              "OMAP34XX SDP # "
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
@@ -288,7 +267,6 @@
  */
 #define CONFIG_SYS_TIMERBASE           (OMAP34XX_GPT2)
 #define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ                  1000
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_RAM_ADDR       0x4020f800