Merge branch 'master' of git://git.denx.de/u-boot-samsung

[karo-tx-uboot.git] / include / configs / omap3_zoom1.h

diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index fa58281593c0306e3cfc4592e3cec920c45b2d75..f7d06521e39fe4b50a605eafcfb9b8ad75e1ffed 100644 (file)
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -32,12 +32,14 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_ARMCORTEXA8     1       /* This is an ARM V7 CPU core */
+#define CONFIG_ARMV7           1       /* This is an ARM V7 CPU core */
 #define CONFIG_OMAP            1       /* in a TI OMAP core */
 #define CONFIG_OMAP34XX                1       /* which is a 34XX */
 #define CONFIG_OMAP3430                1       /* which is in a 3430 */
 #define CONFIG_OMAP3_ZOOM1     1       /* working with Zoom MDK Rev1 */
 
+#define CONFIG_SDRC    /* The chip has SDRC controller */
+
 #include <asm/arch/cpu.h>              /* get chip and board defs */
 #include <asm/arch/omap3.h>
 
@@ -65,7 +67,6 @@
 #define CONFIG_ENV_SIZE                        (128 << 10)     /* 128 KiB */
                                                /* Sector */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (128 << 10))
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* bytes reserved for */
                                                /* initial data */
 
 /*
@@ -215,12 +216,10 @@
 /*
  * Miscellaneous configurable options
  */
-#define V_PROMPT                       "OMAP3 Zoom1# "
-
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-#define CONFIG_SYS_PROMPT              V_PROMPT
+#define CONFIG_SYS_PROMPT              "OMAP3 Zoom1 # "
 #define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
@@ -237,6 +236,12 @@
 #define CONFIG_SYS_LOAD_ADDR           (OMAP34XX_SDRC_CS0)     /* default */
                                                        /* load address */
 
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR       0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE       0x800
+#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_INIT_RAM_ADDR + \
+                                        CONFIG_SYS_INIT_RAM_SIZE - \
+                                        GENERATED_GBL_DATA_SIZE)
 /*
  * OMAP3 has 12 GP timers, they can be driven by the system clock
  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
@@ -278,9 +283,6 @@
 #define PISMO1_NAND_SIZE               GPMC_SIZE_128M
 #define PISMO1_ONEN_SIZE               GPMC_SIZE_128M
 
-#define CONFIG_SYS_MAX_FLASH_SECT      520     /* max number of sectors on */
-                                               /* one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS     2       /* max number of flash banks */
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 2 sectors */
 
 #define CONFIG_SYS_FLASH_BASE          boot_flash_base
@@ -297,23 +299,7 @@
 #define CONFIG_ENV_OFFSET              boot_flash_off
 #define CONFIG_ENV_ADDR                        SMNAND_ENV_OFFSET
 
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT    (100 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT    (100 * CONFIG_SYS_HZ)
-
-/* Flash banks JFFS2 should use */
-#define CONFIG_SYS_MAX_MTD_BANKS       (CONFIG_SYS_MAX_FLASH_BANKS + \
-                                       CONFIG_SYS_MAX_NAND_DEVICE)
-#define CONFIG_SYS_JFFS2_MEM_NAND
-/* use flash_info[2] */
-#define CONFIG_SYS_JFFS2_FIRST_BANK    CONFIG_SYS_MAX_FLASH_BANKS
-#define CONFIG_SYS_JFFS2_NUM_BANKS     1
-
 #ifndef __ASSEMBLY__
-extern struct gpmc *gpmc_cfg;
 extern unsigned int boot_flash_base;
 extern volatile unsigned int boot_flash_env_addr;
 extern unsigned int boot_flash_off;