]> git.kernelconcepts.de Git - karo-tx-uboot.git/blobdiff - include/configs/omap3_zoom2.h
Merge branch 'u-boot/master' into u-boot-arm/master
[karo-tx-uboot.git] / include / configs / omap3_zoom2.h
index 8de3d317f092ca3affdca846e7ebd4fdb76c534d..c57df8edb5c8b59ec67bca7307c94e156332524e 100644 (file)
@@ -8,23 +8,7 @@
  *
  * Configuration settings for the TI OMAP3430 Zoom II board.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -35,8 +19,8 @@
  */
 #define CONFIG_OMAP            1       /* in a TI OMAP core */
 #define CONFIG_OMAP34XX                1       /* which is a 34XX */
-#define CONFIG_OMAP3430                1       /* which is in a 3430 */
 #define CONFIG_OMAP3_ZOOM2     1       /* working with Zoom II */
+#define CONFIG_OMAP_GPIO
 
 #define CONFIG_SDRC    /* The chip has SDRC controller */
 
@@ -53,7 +37,6 @@
 #define V_OSCK                 26000000        /* Clock output from T2 */
 #define V_SCLK                 (V_OSCK >> 1)
 
-#undef CONFIG_USE_IRQ          /* no support for IRQs */
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_CMDLINE_TAG             1       /* enable passing of ATAGs */
  * NS16550 Configuration
  * Zoom2 uses the TL16CP754C on the debug board
  */
-#define CONFIG_SERIAL_MULTI            1
 /*
  * 0 - 1 : first  USB with respect to the left edge of the debug board
  * 2 - 3 : second USB with respect to the left edge of the debug board
  */
-#define ZOOM2_DEFAULT_SERIAL_DEVICE    (&zoom2_serial_device0)
+#define ZOOM2_DEFAULT_SERIAL_DEVICE    0
 
 #define V_NS16550_CLK                  (1843200)       /* 1.8432 Mhz */
 
 #define CONFIG_OMAP_HSMMC              1
 #define CONFIG_DOS_PARTITION           1
 
-/* DDR - I use Micron DDR */
-#define CONFIG_OMAP3_MICRON_DDR                1
-
 /* Status LED */
 #define CONFIG_STATUS_LED              1 /* Status LED enabled */
 #define CONFIG_BOARD_SPECIFIC_LED      1
 #define CONFIG_HARD_I2C                        1
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_SYS_I2C_SLAVE           1
-#define CONFIG_SYS_I2C_BUS             0
-#define CONFIG_SYS_I2C_BUS_SELECT      1
 #define CONFIG_DRIVER_OMAP34XX_I2C     1
 
 /*
 #define CONFIG_SYS_PTV                 7       /* 2^(PTV+1) */
 #define CONFIG_SYS_HZ                  ((V_SCLK) / (2 << CONFIG_SYS_PTV))
 
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using these settings
- */
-#define CONFIG_STACKSIZE       (128 << 10)     /* regular stack 128 KiB */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ   (4 << 10)       /* IRQ stack 4 KiB */
-#define CONFIG_STACKSIZE_FIQ   (4 << 10)       /* FIQ stack 4 KiB */
-#endif
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS   2       /* CS1 may or may not be populated */
 #define PHYS_SDRAM_1           OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE      (32 << 20)      /* at least 32 MiB */
 #define PHYS_SDRAM_2           OMAP34XX_SDRC_CS1
 
-/* SDRAM Bank Allocation method */
-#define SDRC_R_B_C             1
-
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
 #define CONFIG_ENV_OFFSET              SMNAND_ENV_OFFSET
 #define CONFIG_ENV_ADDR                        SMNAND_ENV_OFFSET
 
+#define CONFIG_SYS_CACHELINE_SIZE      64
+
 #endif /* __CONFIG_H */