omap-common: SPL: Add CONFIG_SPL_DISPLAY_PRINT / spl_display_print()

[karo-tx-uboot.git] / include / configs / omap4_common.h

diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index 2192c2b8993e395a07435d0172e30244fd33c741..c1c2fa9f3cccb093b11aa7476b5f402352a1561d 100644 (file)
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -35,6 +35,7 @@
 #define CONFIG_OMAP            1       /* in a TI OMAP core */
 #define CONFIG_OMAP44XX                1       /* which is a 44XX */
 #define CONFIG_OMAP4430                1       /* which is in a 4430 */
+#define CONFIG_OMAP_GPIO
 
 /* Get CPU defs */
 #include <asm/arch/cpu.h>
@@ -48,7 +49,6 @@
 #define V_OSCK                 38400000        /* Clock output from T2 */
 #define V_SCLK                   V_OSCK
 
-#undef CONFIG_USE_IRQ                          /* no support for IRQs */
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_OF_LIBFDT               1
@@ -205,17 +205,6 @@
 #define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
 #define CONFIG_SYS_HZ                  1000
 
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 << 10)     /* Regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ   (4 << 10)       /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ   (4 << 10)       /* FIQ stack */
-#endif
-
 /*
  * SDRAM Memory Map
  * Even though we use two CS all the memory
@@ -224,10 +213,7 @@
 #define CONFIG_NR_DRAM_BANKS   1
 
 #define CONFIG_SYS_SDRAM_BASE          0x80000000
-#define CONFIG_SYS_INIT_RAM_ADDR       0x4030D800
-#define CONFIG_SYS_INIT_RAM_SIZE       0x800
-#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_INIT_RAM_ADDR + \
-                                        CONFIG_SYS_INIT_RAM_SIZE - \
+#define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
                                         GENERATED_GBL_DATA_SIZE)
 
 #ifndef CONFIG_SYS_L2CACHE_OFF
@@ -248,7 +234,8 @@
 #define CONFIG_SPL
 #define CONFIG_SPL_TEXT_BASE           0x40304350
 #define CONFIG_SPL_MAX_SIZE            (38 * 1024)
-#define CONFIG_SPL_STACK               LOW_LEVEL_SRAM_STACK
+#define CONFIG_SPL_STACK               CONFIG_SYS_INIT_SP_ADDR
+#define CONFIG_SPL_DISPLAY_PRINT
 
 /*
  * 64 bytes before this address should be set aside for u-boot.img's
@@ -278,6 +265,7 @@
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
 
 #define CONFIG_SYS_THUMB_BUILD