avr32: delete non generic board mimc200

[karo-tx-uboot.git] / include / configs / p1_p2_rdb_pc.h

diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 185df775aa00e38f381046bede4e0773ef4d5218..b51379e779f36153ec9be4bc5c8059dc6bd646ca 100644 (file)
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -80,6 +80,16 @@
 #define __SW_BOOT_NAND         0x44
 #define __SW_BOOT_PCIE         0x74
 #define CONFIG_SYS_L2_SIZE     (256 << 10)
+/*
+ * Dynamic MTD Partition support with mtdparts
+ */
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_FLASH_CFI_MTD
+#define MTDIDS_DEFAULT "nor0=ec000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=ec000000.nor:128k(dtb),6016k(kernel)," \
+                       "57088k(fs),1m(vsc7385-firmware),1280k(u-boot)"
 #endif
 
 #if defined(CONFIG_P1021RDB)
@@ -98,6 +108,24 @@
 #define __SW_BOOT_NAND         0xec
 #define __SW_BOOT_PCIE         0x6c
 #define CONFIG_SYS_L2_SIZE     (256 << 10)
+/*
+ * Dynamic MTD Partition support with mtdparts
+ */
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_FLASH_CFI_MTD
+#ifdef CONFIG_PHYS_64BIT
+#define MTDIDS_DEFAULT "nor0=fef000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \
+                       "256k(dtb),4608k(kernel),9728k(fs)," \
+                       "256k(qe-ucode-firmware),1280k(u-boot)"
+#else
+#define MTDIDS_DEFAULT "nor0=ef000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \
+                       "256k(dtb),4608k(kernel),9728k(fs)," \
+                       "256k(qe-ucode-firmware),1280k(u-boot)"
+#endif
 #endif
 
 #if defined(CONFIG_P1024RDB)
@@ -145,10 +173,25 @@
 #define __SW_BOOT_NAND         0xe8
 #define __SW_BOOT_PCIE         0xa8
 #define CONFIG_SYS_L2_SIZE     (512 << 10)
+/*
+ * Dynamic MTD Partition support with mtdparts
+ */
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_FLASH_CFI_MTD
+#ifdef CONFIG_PHYS_64BIT
+#define MTDIDS_DEFAULT "nor0=fef000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \
+                       "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)"
+#else
+#define MTDIDS_DEFAULT "nor0=ef000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \
+                       "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)"
+#endif
 #endif
 
 #ifdef CONFIG_SDCARD
-#define CONFIG_SPL
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
@@ -177,7 +220,6 @@
 #endif
 
 #ifdef CONFIG_SPIFLASH
-#define CONFIG_SPL
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
@@ -207,8 +249,6 @@
 #endif
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL
-#define CONFIG_TPL
 #ifdef CONFIG_TPL_BUILD
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
@@ -454,7 +494,6 @@
 
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 #if defined(CONFIG_P1020RDB_PD)
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
@@ -736,7 +775,6 @@
 #define CONFIG_PCI_PNP /* do pci plug-and-play */
 #define CONFIG_E1000   /* Defind e1000 pci Ethernet card*/
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_NET
 
 #define CONFIG_PCI_SCAN_SHOW   /* show pci devices on startup */
 #define CONFIG_DOS_PARTITION
@@ -867,7 +905,6 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_ELF
-#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_REGINFO
 
 /*