Merge branch 'master' of git://git.denx.de/u-boot-arm

[karo-tx-uboot.git] / include / configs / pf5200.h

diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index 28dfe3b2ee7aee632d7921c46339e00dd108c98b..be76478c30c1a48714904aefbb9e25708cc5f77c 100644 (file)
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2003-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*************************************************************************
@@ -38,8 +22,7 @@
  * (easy to change)
  */
 
-#define CONFIG_MPC5200         1       /* This is an MPC5xxx CPU */
-#define CONFIG_MPC5xxx         1       /* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200         1       /* This is an MPC5200 CPU */
 #define CONFIG_ICECUBE         1       /* ... on IceCube board */
 #define CONFIG_PF5200          1       /* ... on PF5200  board */
 #define CONFIG_MPC5200_DDR     1       /* ... use DDR RAM      */
@@ -82,7 +65,6 @@
 
 #define CONFIG_MII             1
 #if 0                          /* test-only !!! */
-#define CONFIG_NET_MULTI       1
 #define CONFIG_EEPRO100                1
 #define CONFIG_SYS_RX_ETH_BUFFER       8       /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X         1
@@ -221,10 +203,9 @@
 
 /* Use SRAM until RAM will be available */
 #define CONFIG_SYS_INIT_RAM_ADDR       MPC5XXX_SRAM
-#define CONFIG_SYS_INIT_RAM_END        MPC5XXX_SRAM_SIZE       /* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_SIZE       MPC5XXX_SRAM_SIZE       /* Size of used area in DPRAM */
 
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
@@ -257,7 +238,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory     */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size  */
 #else
@@ -272,8 +252,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0x100000        /* default load address */
 
-#define CONFIG_SYS_HZ                  1000    /* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_VXWORKS_MAC_PTR     0x00000000      /* Pass Ethernet MAC to VxWorks */
 
 #define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC5xxx CPUs */