Exynos5420: Introduce support for the Peach-Pit board

[karo-tx-uboot.git] / include / configs / pm9263.h

diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index b60a9ade15a130e9975cb1b957327a358779fbac..d9c04d14b96c027510dc61fb2b4f247b35ff4962 100644 (file)
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -6,23 +6,7 @@
  *
  * Configuation settings for the RONETIX PM9263 board.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -44,8 +28,6 @@
 #define CONFIG_SYS_AT91_MAIN_CLOCK     18432000
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768           /* slow clock xtal */
 
-#define CONFIG_SYS_HZ          1000
-
 #define CONFIG_SYS_AT91_CPU_NAME       "AT91SAM9263"
 #define CONFIG_PM9263          1       /* on a Ronetix PM9263 Board    */
 #define CONFIG_ARCH_CPU_INIT
@@ -197,8 +179,8 @@
 
 /* LED */
 #define CONFIG_AT91_LED
-#define        CONFIG_RED_LED          AT91_PIO_PORTB, 7       /* this is the power led */
-#define        CONFIG_GREEN_LED        AT91_PIO_PORTB, 8       /* this is the user1 led */
+#define CONFIG_RED_LED         GPIO_PIN_PB(7) /* this is the power led */
+#define CONFIG_GREEN_LED       GPIO_PIN_PB(8) /* this is the user1 led */
 
 #define CONFIG_BOOTDELAY       3
 
@@ -259,8 +241,8 @@
 #define CONFIG_SYS_NAND_MASK_ALE       (1 << 21)
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE       (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN     AT91_PIO_PORTD, 15
-#define CONFIG_SYS_NAND_READY_PIN      AT91_PIO_PORTB, 30
+#define CONFIG_SYS_NAND_ENABLE_PIN     GPIO_PIN_PD(15)
+#define CONFIG_SYS_NAND_READY_PIN      GPIO_PIN_PB(30)
 
 #endif
 
@@ -288,6 +270,7 @@
 
 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW                    1
 #define CONFIG_DOS_PARTITION                   1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT           1
@@ -355,7 +338,7 @@
 
 #define CONFIG_BOOTCOMMAND             "run flashboot"
 #define CONFIG_ROOTPATH                        "/ronetix/rootfs"
-#define CONFIG_AUTOBOOT_PROMPT         "autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_PROMPT         "autoboot in %d seconds\n", bootdelay
 
 #define CONFIG_CON_ROT                 "fbcon=rotate:3 "
 #define CONFIG_BOOTARGS                        "root=/dev/mtdblock4 rootfstype=jffs2 "\