sunxi: non-FEL SPL boot support for sun7i

[karo-tx-uboot.git] / include / configs / pxa255_idp.h

diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h
index b4327c621c959501caae25ad053be2694a996b76..af7c076df073bb673f18f680a377f37caf2768cf 100644 (file)
--- a/include/configs/pxa255_idp.h
+++ b/include/configs/pxa255_idp.h
@@ -13,23 +13,7 @@
  * Cliff Brake <cliff.brake@gmail.com>
  * Configuation settings for the Accelent/Vibren PXA255 IDP
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -42,7 +26,6 @@
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
 #undef CONFIG_SKIP_LOWLEVEL_INIT                       /* define for developing */
-#undef CONFIG_SKIP_RELOCATE_UBOOT                      /* define for developing */
 #define        CONFIG_SYS_TEXT_BASE    0x0
 
 /*
@@ -56,27 +39,25 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_PXA250          1       /* This is an PXA250 CPU    */
+#define CONFIG_CPU_PXA25X              1       /* This is an PXA250 CPU    */
 
 #undef CONFIG_LCD
 #ifdef CONFIG_LCD
+#define CONFIG_PXA_LCD
 #define CONFIG_SHARP_LM8V31
 #endif
 
 #define CONFIG_MMC             1
 #define CONFIG_DOS_PARTITION   1
-#define BOARD_LATE_INIT                1
-
-#undef CONFIG_USE_IRQ                  /* we don't need IRQ/FIQ stuff */
+#define CONFIG_BOARD_LATE_INIT
 
 /* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_NO_DCACHE
+#define CONFIG_SYS_DCACHE_OFF
 
 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN      (CONFIG_ENV_SIZE + 128*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
 
 /*
  * PXA250 IDP memory map information
@@ -88,7 +69,6 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111
 #define CONFIG_SMC91111_BASE   (PXA_CS5_PHYS + IDP_CS5_ETH_OFFSET + 0x300)
 #define CONFIG_SMC_USE_32_BIT  1
@@ -104,6 +84,7 @@
  */
 #define CONFIG_PXA_SERIAL
 #define CONFIG_FFUART         1       /* we use FFUART on LUBBOCK */
+#define CONFIG_CONS_INDEX      3
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -218,20 +199,17 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   115200          /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2               /* which serial port to use */
 #endif
 
 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_HUSH_PARSER         1
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 
 #define CONFIG_SYS_LONGHELP                            /* undef to save memory         */
 #ifdef CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT              "$ "            /* Monitor Command Prompt */
 #else
-#define CONFIG_SYS_PROMPT              "=> "           /* Monitor Command Prompt */
 #endif
 #define CONFIG_SYS_CBSIZE              256             /* Console I/O Buffer Size      */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
@@ -244,31 +222,17 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0xa0800000      /* default load address */
 
-#define CONFIG_SYS_HZ                  1000
 #define CONFIG_SYS_CPUSPEED            0x161           /* set core clock to 400/200/100 MHz */
 
 #define RTC    1                               /* enable 32KHz osc */
 
-                                               /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
 #ifdef CONFIG_MMC
-#define CONFIG_PXA_MMC
+#define        CONFIG_GENERIC_MMC
+#define        CONFIG_PXA_MMC_GENERIC
 #define CONFIG_CMD_MMC
 #define CONFIG_SYS_MMC_BASE            0xF0000000
 #endif
 
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128*1024)      /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ   (4*1024)        /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ   (4*1024)        /* FIQ stack */
-#endif
-
 /*
  * Physical Memory Map
  */
@@ -294,7 +258,7 @@
 #define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
-#define        CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1)
+#define        CONFIG_SYS_INIT_SP_ADDR         0xfffff800
 
 /*
  * GPIO settings