Exynos5420: Introduce support for the Peach-Pit board

[karo-tx-uboot.git] / include / configs / qong.h

diff --git a/include/configs/qong.h b/include/configs/qong.h
index f30855b9c9899d81699574c6d81c0aea2fb5a239..f9d6642cc49998217588132b4897eadf44865e29 100644 (file)
--- a/include/configs/qong.h
+++ b/include/configs/qong.h
@@ -3,20 +3,7 @@
  *
  * Configuration settings for the Dave/DENX QongEVB-LITE board.
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -28,8 +15,6 @@
 #define CONFIG_ARM1136                 /* This is an arm1136 CPU core */
 #define CONFIG_MX31                    /* in a mx31 */
 #define CONFIG_QONG
-#define CONFIG_MX31_HCLK_FREQ  26000000        /* 26MHz */
-#define CONFIG_MX31_CLK32      32768
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
@@ -43,26 +28,27 @@
 /*
  * Size of malloc() pool
  */
-#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 1536 * 1024)
 
 /*
  * Hardware drivers
  */
 
-#define CONFIG_MXC_UART        1
-#define CONFIG_SYS_MX31_UART1  1
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE   UART1_BASE
 
 #define CONFIG_MXC_GPIO
 #define CONFIG_HW_WATCHDOG
+#define CONFIG_IMX_WATCHDOG
 
 #define CONFIG_MXC_SPI
 #define CONFIG_DEFAULT_SPI_BUS 1
 #define CONFIG_DEFAULT_SPI_MODE        (SPI_MODE_0 | SPI_CS_HIGH)
-#define CONFIG_RTC_MC13783
+#define CONFIG_RTC_MC13XXX
 
-#define CONFIG_PMIC
-#define CONFIG_PMIC_SPI
-#define CONFIG_PMIC_FSL
+#define CONFIG_POWER
+#define CONFIG_POWER_SPI
+#define CONFIG_POWER_FSL
 #define CONFIG_FSL_PMIC_BUS    1
 #define CONFIG_FSL_PMIC_CS     0
 #define CONFIG_FSL_PMIC_CLK    100000
@@ -92,6 +78,8 @@
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10)
 
 /* USB */
 #define CONFIG_CMD_USB
@@ -120,7 +108,6 @@
 
 #define CONFIG_CONS_INDEX      1
 #define CONFIG_BAUDRATE                115200
-#define CONFIG_SYS_BAUDRATE_TABLE      {9600, 19200, 38400, 57600, 115200}
 
 /***********************************************************
  * Command definition
@@ -137,6 +124,7 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_SPI
+#define CONFIG_CMD_UNZIP
 
 #define CONFIG_BOARD_LATE_INIT
 
@@ -144,9 +132,6 @@
 
 #define CONFIG_LOADADDR                0x80800000      /* loadaddr env var */
 
-#define xstr(s)        str(s)
-#define str(s) #s
-
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
        "netdev=eth0\0"                                                 \
        "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
@@ -176,10 +161,10 @@
                "bootm\0"                                               \
        "bootcmd=run flash_self\0"                                      \
        "load=tftp ${loadaddr} ${u-boot}\0"                             \
-       "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE)             \
-               " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE)      \
+       "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE)      \
+               " +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\
                " +${filesize};cp.b ${fileaddr} "                       \
-               xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"          \
+               __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"   \
        "upd=run load update\0"                                         \
        "videomode=video=ctfb:x:640,y:480,depth:16,mode:0,pclk:40000,"  \
                "le:120,ri:40,up:35,lo:10,hs:30,vs:3,sync:100663296,"   \
@@ -189,7 +174,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_SYS_PROMPT              "=> "
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
@@ -204,21 +188,10 @@
 
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
-#define CONFIG_SYS_HZ                  1000
-
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_HUSH_PARSER                 /* Use the HUSH parser */
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define        CONFIG_SYS_PROMPT_HUSH_PS2      "> "
-#endif
 
 #define CONFIG_MISC_INIT_R
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 * 1024)    /* regular stack */
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map