at91sam9260ek: move board id setup to config header

[karo-tx-uboot.git] / include / configs / quantum.h

diff --git a/include/configs/quantum.h b/include/configs/quantum.h
index e440e93a5a9ad47c21a2416ed6978478241e44b3..072bd9c7ee6e811205c07b210718cbff94923484 100644 (file)
--- a/include/configs/quantum.h
+++ b/include/configs/quantum.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2003-2005
+ * (C) Copyright 2003-2010
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -39,6 +39,8 @@
 #define CONFIG_RPXLITE         1       /* QUANTUM is the RPXlite clone */
 #define CONFIG_RMU             1   /* The QUNATUM is based on our RMU */
 
+#define        CONFIG_SYS_TEXT_BASE    0xfff00000
+
 #define CONFIG_8xx_CONS_SMC1   1       /* Console is on SMC1           */
 #undef CONFIG_8xx_CONS_SMC2
 #undef CONFIG_8xx_CONS_NONE
@@ -57,7 +59,7 @@
 #define CONFIG_SERVERIP 10.10.69.49
 #define CONFIG_NETMASK 255.255.255.0
 #define CONFIG_HOSTNAME QUANTUM
-#define CONFIG_ROOTPATH /opt/eldk/pcc_8xx
+#define CONFIG_ROOTPATH "/opt/eldk/pcc_8xx"
 
 #define CONFIG_BOOTARGS         "root=/dev/ram rw"
 
@@ -140,8 +142,6 @@
 
 #define CONFIG_SYS_HZ          1000            /* decrementer freq: 1 ms ticks */
 
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
@@ -156,9 +156,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END        0x2F00  /* End of used area in DPRAM    */
-#define CONFIG_SYS_GBL_DATA_SIZE       64  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x2F00  /* Size of used area in DPRAM   */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -209,7 +208,7 @@
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Timeout for Flash Write (in ms)      */
 
 #define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET          0x00F40000  /*   Offset   of Environment Sector     absolute address 0xfff40000*/
+#define CONFIG_ENV_OFFSET          0x00040000  /*   Offset   of Environment Sector     absolute address 0xfff40000*/
 #define CONFIG_ENV_SECT_SIZE   0x40000 /* Total Size of Environment Sector     */
 #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 #define CONFIG_ENV_ADDR                (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
@@ -318,6 +317,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT     1       /* Use preinit IDE hook */
 #define CONFIG_IDE_8xx_PCCARD  1       /* Use IDE with PC Card Adapter */
 
 #undef CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
@@ -404,14 +404,6 @@
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_16X | MAMR_WLFA_16X | MAMR_TLFA_16X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02    /* Software reboot                      */
-
 /*
  * BCSRx
  *