at91sam9260ek: move board id setup to config header

[karo-tx-uboot.git] / include / configs / s5p_goni.h

diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index c8ea8fda82b694077fcb3ddab2dee0f9d5d853e0..56e83478f8e857fe975e42f610758c0c3a8d2ee8 100644 (file)
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -28,9 +28,8 @@
 #define __CONFIG_H
 
 /* High Level Configuration Options */
-#define CONFIG_ARMV7           1       /* This is an ARM V7 CPU core */
 #define CONFIG_SAMSUNG         1       /* in a SAMSUNG core */
-#define CONFIG_S5PC1XX         1       /* which is in a S5PC1XX Family */
+#define CONFIG_S5P             1       /* which is in a S5P Family */
 #define CONFIG_S5PC110         1       /* which is in a S5PC110 */
 #define CONFIG_MACH_GONI       1       /* working with Goni */
 
@@ -40,8 +39,6 @@
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
-#undef CONFIG_SKIP_RELOCATE_UBOOT
-
 /* input clock of PLL: has 24MHz input clock at S5PC110 */
 #define CONFIG_SYS_CLK_FREQ_C110       24000000
 
@@ -58,19 +55,20 @@
  * 1MB = 0x100000, 0x100000 = 1024 * 1024
  */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (1 << 20))
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes for */
-                                               /* initial data */
 /*
  * select serial console configuration
  */
 #define CONFIG_SERIAL2                 1       /* use SERIAL2 */
-#define CONFIG_SERIAL_MULTI            1
 #define CONFIG_BAUDRATE                        115200
 
 /* MMC */
-#define CONFIG_GENERIC_MMC             1
-#define CONFIG_MMC                     1
-#define CONFIG_S5P_MMC                 1
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_SDHCI
+#define CONFIG_S5P_SDHCI
+
+/* PWM */
+#define CONFIG_PWM                     1
 
 /* It should define before config_cmd_default.h */
 #define CONFIG_SYS_NO_FLASH            1
@@ -177,7 +175,6 @@
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser    */
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_SYS_PROMPT      "Goni # "
 #define CONFIG_SYS_CBSIZE      256     /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE      384     /* Print Buffer Size */
@@ -191,12 +188,6 @@
 
 #define CONFIG_SYS_HZ                  1000
 
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
-/* Stack sizes */
-#define CONFIG_STACKSIZE       (256 << 10)     /* 256 KiB */
-
 /* Goni has 3 banks of DRAM, but swap the bank */
 #define CONFIG_NR_DRAM_BANKS   3
 #define PHYS_SDRAM_1           CONFIG_SYS_SDRAM_BASE   /* OneDRAM Bank #0 */
@@ -220,4 +211,27 @@
 
 #define CONFIG_DOS_PARTITION           1
 
+#define CONFIG_SYS_INIT_SP_ADDR        (CONFIG_SYS_LOAD_ADDR - 0x1000000)
+
+#define CONFIG_SYS_CACHELINE_SIZE       64
+
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_MAX8998
+
+#include <asm/arch/gpio.h>
+/*
+ * I2C Settings
+ */
+#define CONFIG_SOFT_I2C_GPIO_SCL s5pc110_gpio_get_nr(j4, 3)
+#define CONFIG_SOFT_I2C_GPIO_SDA s5pc110_gpio_get_nr(j4, 0)
+
+#define CONFIG_SOFT_I2C        1
+#define CONFIG_SYS_I2C_SPEED   50000
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS 7
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_DUALSPEED
+
 #endif /* __CONFIG_H */