tools/imagetool: remove linker script

[karo-tx-uboot.git] / include / configs / sama5d3xek.h

diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index 56c2454dff2ec1f33f94b49381a70ce6e9d0c6e4..cccc1edbb81e1bf2249d7739f38f213f7db5b507 100644 (file)
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -79,8 +79,19 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-/* No NOR flash */
+/* NOR flash */
+#define CONFIG_CMD_FLASH
+
+#ifdef CONFIG_CMD_FLASH
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_BASE          0x10000000
+#define CONFIG_SYS_MAX_FLASH_SECT      131
+#define CONFIG_SYS_MAX_FLASH_BANKS     1
+#else
 #define CONFIG_SYS_NO_FLASH
+#endif
 
 /*
  * Command line configuration.
@@ -180,6 +191,7 @@
 
 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
 #define CONFIG_CMD_FAT
+#define CONFIG_FAT_WRITE
 #endif
 
 #define CONFIG_SYS_LOAD_ADDR                   0x22000000 /* load address */
@@ -204,13 +216,14 @@
                                "bootm 0x22000000 - 0x21000000"
 #elif CONFIG_SYS_USE_MMC
 /* bootstrap + u-boot + env in sd card */
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_ENV_OFFSET      0x2000
-#define CONFIG_ENV_SIZE                0x1000
+#define CONFIG_ENV_IS_IN_FAT
+#define FAT_ENV_INTERFACE      "mmc"
+#define FAT_ENV_FILE           "uboot.env"
+#define FAT_ENV_DEVICE_AND_PART        "0"
+#define CONFIG_ENV_SIZE                0x4000
 #define CONFIG_BOOTCOMMAND     "fatload mmc 0:1 0x21000000 dtb; " \
                                "fatload mmc 0:1 0x22000000 uImage; " \
                                "bootm 0x22000000 - 0x21000000"
-#define CONFIG_SYS_MMC_ENV_DEV 0
 #else
 #define CONFIG_ENV_IS_NOWHERE
 #endif
@@ -265,8 +278,8 @@
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     0x400
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION   1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME       "u-boot.img"
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_LIBDISK_SUPPORT
 
@@ -287,8 +300,6 @@
 #define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SPL_SPI_BUS             0
-#define CONFIG_SPL_SPI_CS              0
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x8400
 
 #endif