Move default y configs out of arch/board Kconfig

[karo-tx-uboot.git] / include / configs / sandbox.h

diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index c49a847703f917f64c5f281ed5f7b08988971e98..01b9ddf1a84c4dcfd107040fd3a5b994d62cef90 100644 (file)
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -21,9 +21,6 @@
 
 #define CONFIG_SYS_TIMER_RATE          1000000
 
-#define CONFIG_BOOTSTAGE
-#define CONFIG_BOOTSTAGE_REPORT
-
 #define CONFIG_SYS_STDIO_DEREGISTER
 
 /* Number of bits in a C 'long' on this architecture */
@@ -51,15 +48,12 @@
 #define CONFIG_CMD_FS_GENERIC
 #define CONFIG_CMD_MD5SUM
 
-#define CONFIG_SYS_VSNPRINTF
-
 #define CONFIG_CMD_GPIO
-#define CONFIG_SANDBOX_GPIO
-#define CONFIG_SANDBOX_GPIO_COUNT      128
 
 #define CONFIG_CMD_GPT
 #define CONFIG_PARTITION_UUIDS
 #define CONFIG_EFI_PARTITION
+#define CONFIG_DOS_PARTITION
 
 /*
  * Size of malloc() pool, before and after relocation
@@ -79,29 +73,24 @@
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_COMMAND_HISTORY
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_BOOTDELAY       3
 
 #define CONFIG_ENV_SIZE                8192
 #define CONFIG_ENV_IS_NOWHERE
 
 /* SPI - enable all SPI flash types for testing purposes */
-#define CONFIG_SANDBOX_SPI
 #define CONFIG_CMD_SF
 #define CONFIG_CMD_SF_TEST
 #define CONFIG_CMD_SPI
-#define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_ATMEL
 #define CONFIG_SPI_FLASH_EON
 #define CONFIG_SPI_FLASH_GIGADEVICE
 #define CONFIG_SPI_FLASH_MACRONIX
-#define CONFIG_SPI_FLASH_SANDBOX
 #define CONFIG_SPI_FLASH_SPANSION
 #define CONFIG_SPI_FLASH_SST
 #define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_SPI_FLASH_WINBOND
 
 #define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C_SANDBOX
 #define CONFIG_I2C_EDID
 #define CONFIG_I2C_EEPROM
 
@@ -123,40 +112,54 @@
 #define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      {4800, 9600, 19200, 38400, 57600,\
                                        115200}
-#define CONFIG_SANDBOX_SERIAL
 
 #define CONFIG_SYS_NO_FLASH
 
 /* include default commands */
 #include <config_cmd_default.h>
+#include <config_distro_defaults.h>
+
+#define BOOT_TARGET_DEVICES(func) \
+       func(HOST, host, 1) \
+       func(HOST, host, 0)
+
+#define CONFIG_BOOTCOMMAND ""
+
+#include <config_distro_bootcmd.h>
 
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
+#define CONFIG_KEEP_SERVERADDR
+#define CONFIG_UDP_CHECKSUM
+#define CONFIG_CMD_LINK_LOCAL
+#define CONFIG_CMD_CDP
+#define CONFIG_CMD_DNS
+#define CONFIG_CMD_SNTP
+#define CONFIG_TIMESTAMP
+#define CONFIG_CMD_RARP
 #define CONFIG_BOOTP_DNS
 #define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_BOOTP_SERVERIP
-#define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_IP_DEFRAG
 
+/* Can't boot elf images */
+#undef CONFIG_CMD_ELF
+
 #define CONFIG_CMD_HASH
 #define CONFIG_HASH_VERIFY
 #define CONFIG_SHA1
 #define CONFIG_SHA256
 
-#define CONFIG_TPM_TIS_SANDBOX
-
 #define CONFIG_CMD_SANDBOX
 
+#define CONFIG_CMD_ENV_FLAGS
+#define CONFIG_CMD_ENV_CALLBACK
+#define CONFIG_CMD_GREPENV
+#define CONFIG_CMD_ASKENV
+
 #define CONFIG_BOOTARGS ""
 
 #define CONFIG_BOARD_LATE_INIT
 
-#define CONFIG_SOUND
-#define CONFIG_SOUND_SANDBOX
-#define CONFIG_CMD_SOUND
-
 #ifndef SANDBOX_NO_SDL
 #define CONFIG_SANDBOX_SDL
 #endif
@@ -188,16 +191,27 @@
                                        "eth5addr=00:00:11:22:33:46\0" \
                                        "ipaddr=1.2.3.4\0"
 
-#define CONFIG_EXTRA_ENV_SETTINGS      SANDBOX_SERIAL_SETTINGS \
-                                       SANDBOX_ETH_SETTINGS
+#define MEM_LAYOUT_ENV_SETTINGS \
+       "bootm_size=0x10000000\0" \
+       "kernel_addr_r=0x1000000\0" \
+       "fdt_addr_r=0xc00000\0" \
+       "ramdisk_addr_r=0x2000000\0" \
+       "scriptaddr=0x1000\0" \
+       "pxefile_addr_r=0x2000\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       SANDBOX_SERIAL_SETTINGS \
+       SANDBOX_ETH_SETTINGS \
+       BOOTENV \
+       MEM_LAYOUT_ENV_SETTINGS
 
 #define CONFIG_GZIP_COMPRESSED
 #define CONFIG_BZIP2
 #define CONFIG_LZO
 #define CONFIG_LZMA
 
-#define CONFIG_TPM_TIS_SANDBOX
-
 #define CONFIG_CMD_LZMADEC
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_DATE
 
 #endif