sunxi: non-FEL SPL boot support for sun7i

[karo-tx-uboot.git] / include / configs / sbc405.h

diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h
index d93ca2d98f2adaece7c8d70831ef7f8eb3e01893..69dc210917802a3d0bdd85f3c315f27701396bc0 100644 (file)
--- a/include/configs/sbc405.h
+++ b/include/configs/sbc405.h
@@ -1,23 +1,7 @@
 /*
  * (C) Copyright 2001
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -33,9 +17,10 @@
  */
 
 #define CONFIG_405GP           1       /* This is a PPC405 CPU         */
-#define CONFIG_4xx             1       /* ...member of PPC4xx family   */
 #define CONFIG_SBC405          1       /* ...on a WR SBC405 board      */
 
+#define        CONFIG_SYS_TEXT_BASE    0xFFFC0000
+
 #define CONFIG_BOARD_EARLY_INIT_F 1    /* call board_early_init_f()    */
 #define CONFIG_MISC_INIT_R     1       /* call misc_init_r()           */
 
@@ -58,6 +43,7 @@
 #define CONFIG_BOOTCOMMAND      "version;echo;tftpboot ${loadaddr} ${loadfile};bootvx"      /* autoboot command     */
 
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII             1       /* MII PHY management           */
 #define CONFIG_PHY_ADDR                0       /* PHY address                  */
 #define CONFIG_PHY_RESET_DELAY 300     /* Intel LXT971A needs this     */
@@ -126,12 +112,8 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory         */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt       */
 
 #undef CONFIG_SYS_HUSH_PARSER                  /* use "hush" command parser    */
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-#endif
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size      */
@@ -145,8 +127,13 @@
 #define CONFIG_SYS_MEMTEST_START       0x0400000       /* memtest works on     */
 #define CONFIG_SYS_MEMTEST_END         0x0C00000       /* 4 ... 12 MB in DRAM  */
 
+#define CONFIG_CONS_INDEX      1       /* Use UART0                    */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK         get_serial_clock()
+
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK             /* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59   /* ignore ppc405gp errata #59   */
 #define CONFIG_SYS_BASE_BAUD           691200
 
 /* The following table includes the supported baudrates */
@@ -157,16 +144,15 @@
 #define CONFIG_SYS_LOAD_ADDR   0x100000        /* default load address */
 #define CONFIG_SYS_EXTBDINFO   1               /* To use extended board_info (bd_t) */
 
-#define CONFIG_SYS_HZ          1000            /* decrementer freq: 1 ms ticks */
-
 #define CONFIG_VERSION_VARIABLE        1       /* include version env variable */
 
 #define CONFIG_SYS_RX_ETH_BUFFER       16      /* use 16 rx buffer on 405 emac */
 
-#define CONFIG_HARD_I2C                1       /* I2C with hardware support    */
-#undef  CONFIG_SOFT_I2C                        /* I2C bit-banged               */
-#define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address  */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0          400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0          0x7F
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -177,6 +163,7 @@
 #define PCI_HOST_AUTO          2       /* detected via arbiter enable  */
 
 #define CONFIG_PCI                     /* include pci support          */
+#define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_PCI_HOST        PCI_HOST_FORCE  /* select pci host function     */
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play         */
                                        /* resource configuration       */
@@ -254,9 +241,8 @@
 #define CONFIG_SYS_OCM_DATA_SIZE       0x1000
 
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM             */
-#define CONFIG_SYS_INIT_RAM_END        CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM     */
-#define CONFIG_SYS_GBL_DATA_SIZE       128  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM    */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -266,12 +252,4 @@
 #define SPD_EEPROM_ADDRESS     0x50
 #define CONFIG_SPD_EEPROM      1       /* use SPD EEPROM for setup             */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */