e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels

[karo-tx-uboot.git] / include / configs / sbc8349.h

diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index bf7cf82d8ebb404e51348947c83ab9faefb87d11..b8f4b6eee8467d4d262e1a8481407222b577054a 100644 (file)
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -158,7 +158,7 @@
 /* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 
 #define CONFIG_SYS_BR0_PRELIM          (CONFIG_SYS_FLASH_BASE |        /* flash Base address */ \
-                               (2 << BR_PS_SHIFT) |    /* 32 bit port size */   \
+                               (2 << BR_PS_SHIFT) |    /* 16 bit port size */   \
                                BR_V)                   /* valid */
 
 #define CONFIG_SYS_OR0_PRELIM          0xFF806FF7      /* 8 MB flash size */
@@ -270,7 +270,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX     1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -283,6 +282,7 @@
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR+0x4600)
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
+#define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
 #ifdef  CONFIG_SYS_HUSH_PARSER
@@ -304,7 +304,7 @@
 #define CONFIG_SYS_I2C1_OFFSET         0x3000
 #define CONFIG_SYS_I2C2_OFFSET         0x3100
 #define CONFIG_SYS_I2C_OFFSET          CONFIG_SYS_I2C2_OFFSET
-/* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SPD_BUS_NUM... */
+/* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SYS_SPD_BUS_NUM... */
 
 /* TSEC */
 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
@@ -464,10 +464,10 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ   (256 << 20)     /* Initial Memory map for Linux*/
 
 #define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
 
@@ -541,7 +541,8 @@
 #define CONFIG_SYS_SICRL SICRL_LDP_A
 
 #define CONFIG_SYS_HID0_INIT   0x000000000
-#define CONFIG_SYS_HID0_FINAL  HID0_ENABLE_MACHINE_CHECK
+#define CONFIG_SYS_HID0_FINAL  (HID0_ENABLE_MACHINE_CHECK | \
+                                HID0_ENABLE_INSTRUCTION_CACHE)
 
 /* #define CONFIG_SYS_HID0_FINAL               (\
        HID0_ENABLE_INSTRUCTION_CACHE |\
@@ -631,21 +632,13 @@
 
 #if defined(CONFIG_TSEC_ENET)
 #define CONFIG_HAS_ETH0
-#define CONFIG_ETHADDR         00:a0:1e:a0:13:8d
 #define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR                00:a0:1e:a0:13:8e
 #endif
 
-#define CONFIG_IPADDR          192.168.1.234
-
 #define CONFIG_HOSTNAME                SBC8349
 #define CONFIG_ROOTPATH                /tftpboot/rootfs
 #define CONFIG_BOOTFILE                uImage
 
-#define CONFIG_SERVERIP                192.168.1.1
-#define CONFIG_GATEWAYIP       192.168.1.1
-#define CONFIG_NETMASK         255.255.255.0
-
 #define CONFIG_LOADADDR                800000  /* default location for tftp and bootm */
 
 #define CONFIG_BOOTDELAY       6       /* -1 disables auto-boot */