Merge branch 'master' of git://git.denx.de/u-boot-mips

[karo-tx-uboot.git] / include / configs / sc3.h

diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index a254edabdf718926eaf79b6e0fc119a59f025008..a96ffbcec3251c74bb34f97486e9aeb59d35d738 100644 (file)
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -6,23 +6,7 @@
  * (C) Copyright 2003
  * Juergen Beisert, EuroDesign embedded technologies, jbeisert@eurodsn.de
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+ 
  */
 
 #ifndef __CONFIG_H
@@ -83,7 +67,6 @@
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
-#define CONFIG_SERIAL_MULTI
 
 /*
  * define CONFIG_SYS_CLK_FREQ to your base crystal clock in Hz
@@ -162,7 +145,6 @@
 #undef CONFIG_LOADS_ECHO   /* no echo on for serial download   */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
 
-#define CONFIG_NET_MULTI
 /* #define CONFIG_EEPRO100_SROM_WRITE */
 /* #define CONFIG_SHOW_MAC */
 #define CONFIG_EEPRO100
@@ -248,16 +230,16 @@
  * IIC stuff
  *-----------------------------------------------------------------------
  */
-#define  CONFIG_HARD_I2C               /* I2C with hardware support    */
-#undef CONFIG_SOFT_I2C                 /* I2C bit-banged               */
-#define CONFIG_PPC4XX_I2C              /* use PPC4xx driver            */
+#define  CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
 
 #define I2C_INIT
 #define I2C_ACTIVE 0
 #define I2C_TRISTATE 0
 
-#define CONFIG_SYS_I2C_SPEED           100000  /* use the standard 100kHz speed */
-#define CONFIG_SYS_I2C_SLAVE           0x7F            /* mask valid bits */
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0          100000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0          0x7F    /* mask valid bits */
 
 #define CONFIG_RTC_DS1337
 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
@@ -271,6 +253,7 @@
 #define PCI_HOST_AUTO  2               /* detected via arbiter enable  */
 
 #define CONFIG_PCI                     /* include pci support          */
+#define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_PCI_HOST        PCI_HOST_FORCE  /* select pci host function     */
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play         */
                                        /* resource configuration       */
@@ -532,9 +515,9 @@
 
 #define CONFIG_SYS_ISA_MEM_BASE_ADDRESS 0x78000000
 /*
- Die Grafik-Treiber greifen über die Adresse in diesem Macro auf den Chip zu.
+ Die Grafik-Treiber greifen über die Adresse in diesem Macro auf den Chip zu.
  Das funktioniert bei deren Karten, weil sie eine PCI-Bridge benutzen, die
- das gleiche Mapping durchführen kann, wie der SC520 (also Aufteilen von IO-Zugriffen
+ das gleiche Mapping durchführen kann, wie der SC520 (also Aufteilen von IO-Zugriffen
  auf ISA- und PCI-Zyklen)
  */
 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS  0xE8000000