x86: Add Intel Bayley Bay board support

[karo-tx-uboot.git] / include / configs / scb9328.h

diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h
index a09310c889626d4d2789fb46ca21c45e287d3864..f367d62593cd9ba5362adbd48faf8e139e331393 100644 (file)
--- a/include/configs/scb9328.h
+++ b/include/configs/scb9328.h
@@ -10,8 +10,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_ARM920T         1     /* this is an ARM920T CPU     */
-#define CONFIG_IMX             1     /* in a Motorola MC9328MXL Chip */
+#define CONFIG_IMX             1     /* This is a Motorola MC9328MXL Chip */
 #define CONFIG_SCB9328         1     /* on a scb9328tronix board */
 
 #define CONFIG_IMX_SERIAL
@@ -31,16 +30,9 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 
-#undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_SOURCE
-
 /*
  * Boot options. Setting delay to -1 stops autostart count down.
  * NOTE: Sending parameters to kernel depends on kernel version and
@@ -51,7 +43,6 @@
 #define CONFIG_BOOTARGS           "console=ttySMX0,115200n8 root=/dev/mtdblock3 rootfstype=jffs2 mtdparts=scb9328_flash:128k(U-boot)ro,128k(U-boot_env),1m(kernel),4m(root),4m(fs) eval_board=evk9328"
 #define CONFIG_BOOTCOMMAND "bootm 10040000"
 #define CONFIG_SHOW_BOOT_PROGRESS
-#define CONFIG_ETHADDR         80:81:82:83:84:85
 #define CONFIG_NETMASK         255.255.255.0
 #define CONFIG_IPADDR          10.10.10.9
 #define CONFIG_SERVERIP                10.10.10.10
@@ -69,7 +60,6 @@
 #define CONFIG_SYS_MEMTEST_START       0x08100000            /* memtest test area   */
 #define CONFIG_SYS_MEMTEST_END         0x08F00000
 
-#define CONFIG_SYS_HZ                  3686400      /* incrementer freq: 3.6864 MHz */
 #define CONFIG_SYS_CPUSPEED            0x141        /* core clock - register value  */
 
 #define CONFIG_BAUDRATE 115200
@@ -143,8 +133,8 @@
    now.*/
 #undef CONFIG_SYS_FLASH_CFI
 
-#define CONFIG_SYS_FLASH_ERASE_TOUT    (2*CONFIG_SYS_HZ)    /* timeout for Erase operation */
-#define CONFIG_SYS_FLASH_WRITE_TOUT    (2*CONFIG_SYS_HZ)    /* timeout for Write operation */
+#define CONFIG_SYS_FLASH_ERASE_TOUT    240000    /* timeout for Erase operation */
+#define CONFIG_SYS_FLASH_WRITE_TOUT    240000    /* timeout for Write operation */
 
 #define CONFIG_SYS_FLASH_BASE          SCB9328_FLASH_BASE