tegra: Enable keyboard for Seaboard

[karo-tx-uboot.git] / include / configs / seaboard.h

diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h
index 59eef5658f44a9b8227186c69d32e9ca4eeacb9a..46d42281b78d2ee3c53acd503addbfa453e26afa 100644 (file)
--- a/include/configs/seaboard.h
+++ b/include/configs/seaboard.h
@@ -25,8 +25,21 @@
 #define __CONFIG_H
 
 #include <asm/sizes.h>
+
+/* LP0 suspend / resume */
+#define CONFIG_TEGRA2_LP0
+#define CONFIG_AES
+#define CONFIG_TEGRA_PMU
+#define CONFIG_TPS6586X_POWER
+#define CONFIG_TEGRA_CLOCK_SCALING
+
 #include "tegra2-common.h"
 
+/* Enable fdt support for Seaboard. Flash the image in u-boot-dtb.bin */
+#define CONFIG_DEFAULT_DEVICE_TREE     tegra2-seaboard
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
 /* High-level configuration options */
 #define TEGRA2_SYSMEM          "mem=384M@0M nvmem=128M@384M mem=512M@512M"
 #define V_PROMPT               "Tegra2 (SeaBoard) # "
@@ -37,7 +50,62 @@
 #define CONFIG_TEGRA2_ENABLE_UARTD
 #define CONFIG_SYS_NS16550_COM1                NV_PA_APB_UARTD_BASE
 
+/* On Seaboard: GPIO_PI3 = Port I = 8, bit = 3 */
+#define CONFIG_UART_DISABLE_GPIO       GPIO_PI3
+
 #define CONFIG_MACH_TYPE               MACH_TYPE_SEABOARD
 #define CONFIG_SYS_BOARD_ODMDATA       0x300d8011 /* lp1, 1GB */
 
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* SPI */
+#define CONFIG_TEGRA2_SPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_SIZE          (4 << 20)
+
+/* I2C */
+#define CONFIG_TEGRA_I2C
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS         4
+#define CONFIG_SYS_I2C_SPEED           100000
+#define CONFIG_CMD_I2C
+
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA2_MMC
+#define CONFIG_CMD_MMC
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+
+/* Environment in SPI */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_MAX_HZ          48000000
+#define CONFIG_ENV_SPI_MODE            SPI_MODE_0
+
+#define CONFIG_ENV_SECT_SIZE    CONFIG_ENV_SIZE
+#define CONFIG_ENV_OFFSET       (CONFIG_SPI_FLASH_SIZE - CONFIG_ENV_SECT_SIZE)
+
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* Enable keyboard */
+#define CONFIG_TEGRA2_KEYBOARD
+#define CONFIG_KEYBOARD
+
+#undef TEGRA2_DEVICE_SETTINGS
+#define TEGRA2_DEVICE_SETTINGS "stdin=serial,tegra-kbc\0" \
+                                       "stdout=serial\0" \
+                                       "stderr=serial\0"
 #endif /* __CONFIG_H */