tegra: Enable USB keyboard

[karo-tx-uboot.git] / include / configs / seaboard.h

diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h
index 7d2914472a6974cd9d7251a1fac71ea72b9cc5a8..ab10bd0abc7e57a24e2115eb3fd3698899016dd6 100644 (file)
--- a/include/configs/seaboard.h
+++ b/include/configs/seaboard.h
@@ -25,31 +25,92 @@
 #define __CONFIG_H
 
 #include <asm/sizes.h>
-#include "tegra2-common.h"
+
+/* LP0 suspend / resume */
+#define CONFIG_TEGRA_LP0
+#define CONFIG_AES
+#define CONFIG_TEGRA_PMU
+#define CONFIG_TPS6586X_POWER
+#define CONFIG_TEGRA_CLOCK_SCALING
+
+#include "tegra20-common.h"
+
+/* Enable fdt support for Seaboard. Flash the image in u-boot-dtb.bin */
+#define CONFIG_DEFAULT_DEVICE_TREE     tegra20-seaboard
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
 
 /* High-level configuration options */
-#define TEGRA2_SYSMEM          "mem=384M@0M nvmem=128M@384M mem=512M@512M"
-#define V_PROMPT               "Tegra2 (SeaBoard) # "
-#define CONFIG_TEGRA2_BOARD_STRING     "NVIDIA Seaboard"
+#define V_PROMPT               "Tegra20 (SeaBoard) # "
+#define CONFIG_TEGRA_BOARD_STRING      "NVIDIA Seaboard"
 
 /* Board-specific serial config */
-#define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA2_ENABLE_UARTD
+#define CONFIG_TEGRA_ENABLE_UARTD
 #define CONFIG_SYS_NS16550_COM1                NV_PA_APB_UARTD_BASE
 
+/* On Seaboard: GPIO_PI3 = Port I = 8, bit = 3 */
+#define CONFIG_UART_DISABLE_GPIO       GPIO_PI3
+
 #define CONFIG_MACH_TYPE               MACH_TYPE_SEABOARD
-#define CONFIG_SYS_BOARD_ODMDATA       0x300d8011 /* lp1, 1GB */
 
 #define CONFIG_BOARD_EARLY_INIT_F
 
+/* I2C */
+#define CONFIG_TEGRA_I2C
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS         4
+#define CONFIG_SYS_I2C_SPEED           100000
+#define CONFIG_CMD_I2C
+
 /* SD/MMC */
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_TEGRA2_MMC
+#define CONFIG_TEGRA_MMC
 #define CONFIG_CMD_MMC
 
 #define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
+
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_SYS_MMC_ENV_PART 2
+
+/* USB Host support */
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
+/* Enable keyboard */
+#define CONFIG_TEGRA_KEYBOARD
+#define CONFIG_KEYBOARD
+
+/* USB keyboard */
+#define CONFIG_USB_KEYBOARD
+
+#include "tegra-common-post.h"
+
+/* NAND support */
+#define CONFIG_CMD_NAND
+#define CONFIG_TEGRA_NAND
+
+/* Max number of NAND devices */
+#define CONFIG_SYS_MAX_NAND_DEVICE     1
+
+/* Somewhat oddly, the NAND base address must be a config option */
+#define CONFIG_SYS_NAND_BASE   NV_PA_NAND_BASE
 #endif /* __CONFIG_H */