at91sam9260ek: move board id setup to config header

[karo-tx-uboot.git] / include / configs / sh7785lcr.h

diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h
index 537ec4ecadce12fbb234d787181a65069cb89549..9c32bfc58bb1f5d8ef0f78c1db944dd0c3ee9f11 100644 (file)
--- a/include/configs/sh7785lcr.h
+++ b/include/configs/sh7785lcr.h
@@ -37,10 +37,10 @@
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_NFS
-#define CONFIG_CMD_DFL
 #define CONFIG_CMD_SDRAM
 #define CONFIG_CMD_RUN
 #define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_SH_ZIMAGEBOOT
 
 #define CONFIG_CMD_USB
 #define CONFIG_USB_STORAGE
@@ -61,11 +61,24 @@
 #undef CONFIG_SHOW_BOOT_PROGRESS
 
 /* MEMORY */
+#if defined(CONFIG_SH_32BIT)
+#define CONFIG_SYS_TEXT_BASE           0x8FF80000
+/* 0x40000000 - 0x47FFFFFF does not use */
+#define CONFIG_SH_SDRAM_OFFSET         (0x8000000)
+#define SH7785LCR_SDRAM_PHYS_BASE      (0x40000000 + CONFIG_SH_SDRAM_OFFSET)
+#define SH7785LCR_SDRAM_BASE           (0x80000000 + CONFIG_SH_SDRAM_OFFSET)
+#define SH7785LCR_SDRAM_SIZE           (384 * 1024 * 1024)
+#define SH7785LCR_FLASH_BASE_1         (0xa0000000)
+#define SH7785LCR_FLASH_BANK_SIZE      (64 * 1024 * 1024)
+#define SH7785LCR_USB_BASE             (0xa6000000)
+#else
+#define CONFIG_SYS_TEXT_BASE           0x0FF80000
 #define SH7785LCR_SDRAM_BASE           (0x08000000)
 #define SH7785LCR_SDRAM_SIZE           (128 * 1024 * 1024)
 #define SH7785LCR_FLASH_BASE_1         (0xa0000000)
 #define SH7785LCR_FLASH_BANK_SIZE      (64 * 1024 * 1024)
 #define SH7785LCR_USB_BASE             (0xb4000000)
+#endif
 
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_PROMPT              "=> "
@@ -99,7 +112,6 @@
 #define CONFIG_SYS_MONITOR_BASE        (SH7785LCR_FLASH_BASE_1)
 #define CONFIG_SYS_MONITOR_LEN         (512 * 1024)
 #define CONFIG_SYS_MALLOC_LEN          (512 * 1024)
-#define CONFIG_SYS_GBL_DATA_SIZE       (256)
 #define CONFIG_SYS_BOOTMAPSZ           (8 * 1024 * 1024)
 
 /* FLASH */
@@ -133,6 +145,15 @@
 #define CONFIG_PCI
 #define CONFIG_SH4_PCI
 #define CONFIG_SH7780_PCI
+#if defined(CONFIG_SH_32BIT)
+#define CONFIG_SH7780_PCI_LSR  0x1ff00001
+#define CONFIG_SH7780_PCI_LAR  0x5f000000
+#define CONFIG_SH7780_PCI_BAR  0x5f000000
+#else
+#define CONFIG_SH7780_PCI_LSR  0x07f00001
+#define CONFIG_SH7780_PCI_LAR  CONFIG_SYS_SDRAM_SIZE
+#define CONFIG_SH7780_PCI_BAR  CONFIG_SYS_SDRAM_SIZE
+#endif
 #define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW   1
 
@@ -144,8 +165,15 @@
 #define CONFIG_PCI_IO_PHYS     CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE     0x00200000      /* Size of IO window */
 
+#if defined(CONFIG_SH_32BIT)
+#define CONFIG_PCI_SYS_PHYS    SH7785LCR_SDRAM_PHYS_BASE
+#else
+#define CONFIG_PCI_SYS_PHYS    CONFIG_SYS_SDRAM_BASE
+#endif
+#define CONFIG_PCI_SYS_BUS     CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_SIZE    CONFIG_SYS_SDRAM_SIZE
+
 /* Network device (RTL8169) support */
-#define CONFIG_NET_MULTI
 #define CONFIG_RTL8169
 
 /* ENV setting */
@@ -160,7 +188,7 @@
 /* Board Clock */
 /* The SCIF used external clock. system clock only used timer. */
 #define CONFIG_SYS_CLK_FREQ    50000000
-#define TMU_CLK_DIVIDER                4
-#define CONFIG_SYS_HZ                  (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV         4
+#define CONFIG_SYS_HZ          1000
 
 #endif /* __SH7785LCR_H */